From: tomi.valkeinen@ti.com (Tomi Valkeinen) Date: Mon, 17 Mar 2014 15:28:51 +0200 Subject: [PATCH] ARM: OMAP5: DSS hwmod data In-Reply-To: <5326F71C.1060602@compulab.co.il> References: <1394619996-3525-1-git-send-email-tomi.valkeinen@ti.com> <532037E0.1080309@ti.com> <53258DDA.50005@compulab.co.il> <532692A7.7000509@ti.com> <5326F71C.1060602@compulab.co.il> Message-ID: <5326F893.3080607@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 17/03/14 15:22, Dmitry Lifshitz wrote: > Hi Tomi, > > Thank you for the feedback. > > We have OMAP5 based board with no ESD & Level Translator chip. > So, I made a quick hack in tpd12s015 driver to skip using un-relevant > GPIOs. If you don't have tpd12s015 on your board, don't modify it. Remove it from your board's dts file totally. > I've copied DSS DT structure from uEmv board *.dts. > However the HDMI output is not activate yet. > > Here is some debug output: > > root at cm-debian:~# dmesg | grep -i dss > [ 0.040554] omap_hwmod: dss_dispc: cannot be enabled for reset (3) > [ 0.043135] omap_hwmod: dss_dsi1: cannot be enabled for reset (3) > [ 0.045725] omap_hwmod: dss_dsi2: cannot be enabled for reset (3) > [ 0.048311] omap_hwmod: dss_hdmi: cannot be enabled for reset (3) > [ 0.050888] omap_hwmod: dss_rfbi: cannot be enabled for reset (3) > [ 0.325392] DSS: set fck to 192000000 > [ 0.325400] DSS: dss_runtime_get > [ 0.325427] DSS: dss_restore_context > [ 0.325445] OMAP DSS rev 6.1 > [ 0.325450] DSS: dss_runtime_put > [ 0.325456] DSS: dss_save_context > [ 0.325461] DSS: context saved > [ 0.325707] DSS: dss_restore_context > [ 0.325711] DSS: context restored > [ 0.325746] omapdss_dispc 58001000.dispc: OMAP DISPC rev 5.1 > [ 0.325838] DSS: dss_save_context > [ 0.325843] DSS: context saved > > > I do not use uEvm BSP u-Boot. I'm forking from this source: > git://git.denx.de/u-boot-ti.git > > Perhaps I'm missing some clocks initialization? > What are the correct bootargs for activating HDMI video output? HDMI is the only output on the uevm, and if your board is similar, no boot args are needed. But, of course, you need omapfb or omapdrm to manage the display. Tomi -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 901 bytes Desc: OpenPGP digital signature URL: