Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from phobos.denx.de (phobos.denx.de [85.214.62.61]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id E0428C4332F for ; Sat, 17 Dec 2022 13:44:00 +0000 (UTC) Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 8E48A84FF0; Sat, 17 Dec 2022 14:43:58 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=kernel.org header.i=@kernel.org header.b="Mcmv6e57"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id DB84385175; Sat, 17 Dec 2022 14:43:56 +0100 (CET) Received: from ams.source.kernel.org (ams.source.kernel.org [145.40.68.75]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id CC35484E8F for ; Sat, 17 Dec 2022 14:43:53 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=kernel.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=rogerq@kernel.org Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 3473FB80760; Sat, 17 Dec 2022 13:43:53 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id C0C51C433D2; Sat, 17 Dec 2022 13:43:50 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1671284631; bh=fgNe2kQKYol9eZ+5p6KrTUjDpd0LhJfG3nhWWLMNSMg=; h=Date:Subject:To:Cc:References:From:In-Reply-To:From; b=Mcmv6e57caqSyQxtpWloynVqkKFgCrxpEPXQ++9TpO9+UNBisxxGmZro6vDtxb2Us WCG7zEsciJyWZQcs21abmlkkg2+9SPrm2J/BPfFcfz3t5ILUAS56tOv9FDxvhyBbSt B2hd5CR1ldnlHFnGmZmLD5eRq9rmPseX0rz+IxC6BToQb6Xr5K3djVqNgLtRrrJuch +2ZJCH419GOB8wv0OXIzNxJ7NxBc5zuDOAfECxYAcX/0xun+40nEKYfP/KeL1rfejE m8zIvKwG5aGte8yj3EwbS5/n9T7MSidRrIZ7w7TmbkuSDimkYEtKyYDzNzajm/a/Qa +St79By3pQO5Q== Message-ID: <532d5bea-ffb6-8c40-2956-fa235354759b@kernel.org> Date: Sat, 17 Dec 2022 15:43:47 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.4.2 Subject: Re: [u-boot][PATCH 00/14] rawnand: omap_gpmc: driver model support Content-Language: en-US To: Michael Nazzareno Trimarchi Cc: Dario Binacchi , trini@konsulko.com, u-boot@lists.denx.de References: <20221011115012.6181-1-rogerq@kernel.org> <2488ec3d-c07e-0df9-21c7-18b865ae53d6@kernel.org> <5756cc3f-3ee1-ba9b-b746-79ba6eb229af@kernel.org> <6a096f67-c7e0-f392-c70a-bdcfa97b6956@kernel.org> <94a4a2ab-0d0f-8e6d-6457-054af718910d@kernel.org> From: Roger Quadros In-Reply-To: Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.6 at phobos.denx.de X-Virus-Status: Clean On 17/12/2022 15:38, Michael Nazzareno Trimarchi wrote: > Hi > > On Sat, Dec 17, 2022 at 2:00 PM Roger Quadros wrote: >> >> Hi Michael & Dario, >> >> On 12/12/2022 11:39, Michael Nazzareno Trimarchi wrote: >>> Hi Roger >>> >>> Most of the building problem can be tested with this configuration >>> >>> make ARCH=arm chiliboard_defconfig >> >> I resolved the original issue for all boards but now face a new issue >> only with the chiliboard. >> >> arm-none-linux-gnueabihf-ld.bfd: drivers/mtd/nand/raw/omap_elm.o: in function `dev_read_resource': >> /work/u-boot/include/dm/read.h:1139: undefined reference to `ofnode_read_resource' >> AR common/built-in.o >> make[2]: *** [/work/u-boot/scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 >> make[1]: *** [/work/u-boot/Makefile:2071: spl/u-boot-spl] Error 2 >> make[1]: *** Waiting for unfinished jobs.... >> make[1]: Leaving directory '/tmp' >> make: *** [Makefile:177: sub-make] Error 2 >> >> The following config options are set >> CONFIG_DM_DEV_READ_INLINE=y > > What happen is that is not set? I removed "default y" for it in drivers/core/Kconfig Now I get arm-none-linux-gnueabihf-ld.bfd: drivers/mtd/nand/raw/omap_elm.o: in function `elm_probe': /work/u-boot/drivers/mtd/nand/raw/omap_elm.c:206: undefined reference to `dev_read_resource' make[2]: *** [/work/u-boot/scripts/Makefile.spl:527: spl/u-boot-spl] Error 1 make[1]: *** [/work/u-boot/Makefile:2071: spl/u-boot-spl] Error 2 make[1]: *** Waiting for unfinished jobs.... cheers, -roger > > Michael > >> CONFIG_SUPPORT_OF_CONTROL=y >> >> My understanding is that in case of spl build (Makefile.spl), the >> drivers/core/ofnode.o does not seem to be included >> thus causing the linking error. >> >> Any suggestions how to fix this? >> >> I've pushed the patches here >> https://github.com/rogerq/u-boot/commits/for-v2023.01/am64-nand-base-1.4 >> >> cheers, >> -roger >> >>> >>> Michael >>> >>> On Mon, Dec 12, 2022 at 10:27 AM Dario Binacchi >>> wrote: >>>> >>>> Hi Roger, >>>> >>>> On Mon, Dec 12, 2022 at 10:12 AM Roger Quadros wrote: >>>>> >>>>> Hi Dario, >>>>> >>>>> On 11/12/2022 15:56, Dario Binacchi wrote: >>>>>> Hi Roger, >>>>>> >>>>>> On Fri, Nov 25, 2022 at 1:38 PM Roger Quadros wrote: >>>>>>> >>>>>>> Hi Michael, >>>>>>> >>>>>>> On 08/11/2022 11:26, Michael Nazzareno Trimarchi wrote: >>>>>>>> Hi Roger >>>>>>>> >>>>>>>> On Fri, Nov 4, 2022 at 2:27 PM Roger Quadros wrote: >>>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> On 11/10/2022 14:49, Roger Quadros wrote: >>>>>>>>>> Hi, >>>>>>>>>> >>>>>>>>>> This series adds driver model support for rawnand: omap_gpmc >>>>>>>>>> and omap_elm drivers. >>>>>>>>>> >>>>>>>>>> This will enable the driver to be used on K2/K3 platforms as well. >>>>>>>>> >>>>>>>>> Any comments on patches 5 and later? Thanks >>>>>>>>> >>>>>>>> >>>>>>>> We will try to close this week. >>>>>>> >>>>>>> Could you please give your comments on the last few patches. Thanks! >>>>>>> >>>>>>> cheers, >>>>>>> -roger >>>>>>> >>>>>>>> >>>>>>>> Michael >>>>>>>> >>>>>>>>> >>>>>>>>> cheers, >>>>>>>>> -roger >>>>>>>>> >>>>>>>>>> >>>>>>>>>> cheers, >>>>>>>>>> -roger >>>>>>>>>> >>>>>>>>>> Roger Quadros (14): >>>>>>>>>> mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h >>>>>>>>>> mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms >>>>>>>>>> mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms >>>>>>>>>> mtd: rawnand: omap_gpmc: Optimize NAND reads >>>>>>>>>> mtd: rawnand: omap_gpmc: Fix BCH6/16 HW based correction >>>>>>>>>> mtd: rawnand: nand_base: Allow base driver to be used in SPL without >>>>>>>>>> nand_bbt >>>>>>>>>> mtd: rawnand: nand_spl_loaders: Fix cast type build warning >>>>>>>>>> mtd: rawnand: omap_gpmc: Reduce .bss usage >>>>>>>>>> dt-bindings: mtd: Add ti,gpmc-nand DT binding documentation >>>>>>>>>> mtd: rawnand: omap_gpmc: support u-boot driver model >>>>>>>>>> mtd: rawnand: omap_gpmc: Add SPL NAND support >>>>>>>>>> mtd: rawnand: omap_gpmc: Enable SYS_NAND_PAGE_COUNT for OMAP_GPMC >>>>>>>>>> dt-bindings: mtd: Add ti,elm DT binding documentation >>>>>>>>>> mtd: rawnand: omap_elm: u-boot driver model support >>>>>>>>>> >>>>>>>>>> doc/device-tree-bindings/mtd/ti,elm.yaml | 72 +++ >>>>>>>>>> .../mtd/ti,gpmc-nand.yaml | 129 +++++ >>>>>>>>>> drivers/mtd/nand/raw/Kconfig | 11 +- >>>>>>>>>> drivers/mtd/nand/raw/Makefile | 2 +- >>>>>>>>>> drivers/mtd/nand/raw/nand_base.c | 18 +- >>>>>>>>>> drivers/mtd/nand/raw/nand_spl_loaders.c | 2 +- >>>>>>>>>> drivers/mtd/nand/raw/omap_elm.c | 33 +- >>>>>>>>>> .../mtd => drivers/mtd/nand/raw}/omap_elm.h | 6 + >>>>>>>>>> drivers/mtd/nand/raw/omap_gpmc.c | 500 +++++++++++++----- >>>>>>>>>> 9 files changed, 637 insertions(+), 136 deletions(-) >>>>>>>>>> create mode 100644 doc/device-tree-bindings/mtd/ti,elm.yaml >>>>>>>>>> create mode 100644 doc/device-tree-bindings/mtd/ti,gpmc-nand.yaml >>>>>>>>>> rename {include/linux/mtd => drivers/mtd/nand/raw}/omap_elm.h (97%) >>>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>> >>>>>> I tried to merge your whole series but after the second fix and the >>>>>> third time the CI/CD pipeline failed >>>>> >>>>> Do you have the link to the failure? >>>> >>>> These are the CI/CD pipelines links: >>>> https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540827 >>>> https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540876 >>>> but I think you don't have permission to access them. >>>> >>>> Anyway: >>>> >>>> for https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540827: >>>> +==================================================== >>>> 345 arm: + am335x_guardian >>>> 346+drivers/mtd/nand/raw/omap_gpmc.c:1208:26: error: 'nand_chip' >>>> defined but not used [-Werror=unused-variable] >>>> 347+ 1208 | static struct nand_chip *nand_chip; /* First NAND chip for >>>> SPL use only */ >>>> 348+ | ^~~~~~~~~ >>>> 349+cc1: all warnings being treated as errors >>>> 350+make[5]: *** [scripts/Makefile.build:258: >>>> drivers/mtd/nand/raw/omap_gpmc.o] Error 1 >>>> 351+make[4]: *** [scripts/Makefile.build:398: drivers/mtd/nand/raw] Error 2 >>>> 352+make[3]: *** [scripts/Makefile.build:398: drivers/mtd/nand] Error 2 >>>> 353+make[2]: *** [scripts/Makefile.build:398: drivers/mtd] Error 2 >>>> 354+make[1]: *** [Makefile:1871: drivers] Error 2 >>>> 355+make: *** [Makefile:177: sub-make] Error 2 >>>> >>>> for https://source.denx.de/u-boot/custodians/u-boot-nand-flash/-/jobs/540876: >>>> +==================================================== >>>> 498 arm: + chiliboard >>>> 499+arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function >>>> `nand_init_chip': >>>> 500+drivers/mtd/nand/raw/nand.c:92: undefined reference to `board_nand_init' >>>> 501+make[1]: *** [Makefile:1778: u-boot] Error 1 >>>> 502+make: *** [Makefile:177: sub-make] Error 2 >>>> 503 arm: w+ am335x_shc_netboot >>>> 504+===================== WARNING ====================== >>>> 505+This board does not use CONFIG_DM_I2C (Driver Model >>>> 506+for I2C drivers). Please update the board to use >>>> 507+CONFIG_DM_I2C before the v2022.04 release. Failure to >>>> 508+update by the deadline may result in board removal. >>>> 509+See doc/develop/driver-model/migration.rst for more info. >>>> 510+==================================================== >>>> 511 arm: + cm_t43 >>>> 512+arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function >>>> `nand_init_chip': >>>> 513+drivers/mtd/nand/raw/nand.c:92: undefined reference to `board_nand_init' >>>> 514+make[1]: *** [Makefile:1778: u-boot] Error 1 >>>> 515+make: *** [Makefile:177: sub-make] Error 2 >>>> 516 arm: w+ am335x_shc_sdboot >>>> >>>> In both cases failed the "build all 32bit ARM platforms" test. >>>> >>>> I think you have to run the command: >>>> ./tools/buildman/buildman -o /tmp -PEWM arm -x aarch64 >>>> if you have to run the tests locally. >>>> >>>> Thanks and regards, >>>> Dario >>>> >>>>> >>>>>> I thought it's better you fix the problems. So, I only accepted some >>>>>> of the first few patches in the series: >>>>>> 01/14 mtd: rawnand: omap_gpmc: Deprecate asm/arch/mem.h >>>>>> 02/14 mtd: rawnand: omap_gpmc: Enable build for K2/K3 platforms >>>>>> 03/14 mtd: rawnand: omap_gpmc: Fix build warning on 64-bit platforms >>>>>> 04/14 mtd: rawnand: omap_gpmc: Optimize NAND reads >>>>>> 07/14 mtd: rawnand: nand_spl_loaders: Fix cast type build warning >>>>>> 08/14 mtd: rawnand: omap_gpmc: Reduce .bss usage >>>>>> >>>>>> For the others, please fix them to run the tests successfully. >>>>> >>>>> No problem. I will try to fix and run them through the CI testing myself >>>>> before re-posting. >>>>> >>>>> cheers, >>>>> -roger >>>> >>>> >>>> >>>> -- >>>> >>>> Dario Binacchi >>>> >>>> Embedded Linux Developer >>>> >>>> dario.binacchi@amarulasolutions.com >>>> >>>> __________________________________ >>>> >>>> >>>> Amarula Solutions SRL >>>> >>>> Via Le Canevare 30, 31100 Treviso, Veneto, IT >>>> >>>> T. +39 042 243 5310 >>>> info@amarulasolutions.com >>>> >>>> www.amarulasolutions.com >>> >>> >>> > > >