From: Roger Quadros Subject: Re: [PATCH v4 4/4] ARM: dts: dra7: add OCP2SCP3 and SATA nodes Date: Wed, 7 May 2014 11:14:48 +0300 Message-ID: <5369EB78.7080105@ti.com> References: <1398274237-24510-1-git-send-email-rogerq@ti.com> <1398274575-24818-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1398274575-24818-1-git-send-email-rogerq-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org Cc: kishon-l0cyMroinI0@public.gmane.org, george.cherian-l0cyMroinI0@public.gmane.org, balbi-l0cyMroinI0@public.gmane.org, balajitk-l0cyMroinI0@public.gmane.org, hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Benoit Cousson , R Sricharan , "Menon, Nishanth" List-Id: devicetree@vger.kernel.org Tony, On 04/23/2014 08:36 PM, Roger Quadros wrote: > From: Balaji T K > > Add nodes for OCP2SCP3 bus, SATA controller and SATA PHY. > > [Roger Q] Clean up. > > CC: Benoit Cousson > Signed-off-by: Balaji T K > Signed-off-by: Roger Quadros > --- > arch/arm/boot/dts/dra7.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ > 1 file changed, 39 insertions(+) > > diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi > index 1c0f8e1..084f42e 100644 > --- a/arch/arm/boot/dts/dra7.dtsi > +++ b/arch/arm/boot/dts/dra7.dtsi > @@ -789,6 +789,45 @@ > dma-names = "tx0", "rx0"; > status = "disabled"; > }; > + > + omap_control_sata: control-phy@4a002374 { > + compatible = "ti,control-phy-pipe3"; > + reg = <0x4a002374 0x4>; > + reg-names = "power"; > + clocks = <&sys_clkin1>; > + clock-names = "sysclk"; > + }; > + > + /* OCP2SCP3 */ > + ocp2scp@4a090000 { > + compatible = "ti,omap-ocp2scp"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + reg = <0x4a090000 0x20>; > + ti,hwmods = "ocp2scp3"; > + sata_phy: phy@4A096000 { > + compatible = "ti,phy-pipe3-sata"; > + reg = <0x4A096000 0x80>, /* phy_rx */ > + <0x4A096400 0x64>, /* phy_tx */ > + <0x4A096800 0x40>; /* pll_ctrl */ > + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; > + ctrl-module = <&omap_control_sata>; > + clocks = <&sys_clkin1>; > + clock-names = "sysclk"; > + #phy-cells = <0>; > + }; > + }; > + > + sata: sata@4a141100 { > + compatible = "snps,dwc-ahci"; > + reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; > + interrupts = ; This will need to be changed like so if the IRQ crossbar changes [1] go in + interrupts = ; cheers, -roger [1] - http://article.gmane.org/gmane.linux.documentation/23293 > + phys = <&sata_phy>; > + phy-names = "sata-phy"; > + clocks = <&sata_ref_clk>; > + ti,hwmods = "sata"; > + }; > }; > }; > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html