From: santosh.shilimkar@ti.com (Santosh Shilimkar) Date: Thu, 8 May 2014 10:45:24 -0400 Subject: [PATCH 1/2] gpio: omap: prepare and unprepare the debounce clock In-Reply-To: <1398233465-8845-2-git-send-email-rnayak@ti.com> References: <1398233465-8845-1-git-send-email-rnayak@ti.com> <1398233465-8845-2-git-send-email-rnayak@ti.com> Message-ID: <536B9884.6030809@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wednesday 23 April 2014 02:11 AM, Rajendra Nayak wrote: > Replace the clk_enable()s with a clk_prepare_enable() and > the clk_disables()s with a clk_disable_unprepare() > > This never showed issues due to the OMAP platform code (hwmod) > leaving these clocks in clk_prepare()ed state by default. > > Reported-by: Kishon Vijay Abraham I > Signed-off-by: Rajendra Nayak > Cc: linux-gpio at vger.kernel.org > Cc: Santosh Shilimkar > Cc: Kevin Hilman > --- $subject patch looks fine but I don't see patch 2/2 assuming this is series of two patches. Acked-by: Santosh Shilimkar