From: hong zhang Subject: Re: asoc: no valid backend routes for PCM: SDP4430 Media Date: Wed, 8 Jun 2011 12:08:09 -0700 (PDT) Message-ID: <537926.35497.qm@web161718.mail.bf1.yahoo.com> References: <4DEF85B5.10808@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from nm6-vm1.bullet.mail.bf1.yahoo.com (nm6-vm1.bullet.mail.bf1.yahoo.com [98.139.213.128]) by alsa0.perex.cz (Postfix) with SMTP id E24BC24577 for ; Wed, 8 Jun 2011 21:08:11 +0200 (CEST) In-Reply-To: <4DEF85B5.10808@ti.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: Liam Girdwood Cc: "alsa-devel@alsa-project.org" List-Id: alsa-devel@alsa-project.org Liam, I have downloaded kernel tar ball. Three questions need your help. 1. which defconfig should be used in arch/arm/configs? I do not see OMAP4 for SDP4430 (blaze board). Panda does not have DMIC only blaze has it. 2. On blaze board, I have to turn off two analog captures and leave DMIC open. Can you verify my gst-launch is correct? I cannot capture voice from DMIC on OMAP4 blaze board us it. gst-launch-0.10 -v alsasrc num-buffers=1000 ! 'audio/x-raw-int,rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav 3. If I specify DMIC device, command is rejected. gst-launch-0.10 -v alsasrc device="hw:0,10" num-buffers=1000 ! 'audio/x-raw-int, rate=8000,channels=1,endianness=1234,width=16,depth=16' ! audioconvert ! wavenc! filesink location=/home/normanc/Desktop/8000.wav TI support team in France says item 2 should work for DMIC. But I simply could not get it. TI team says item 2 works for "official release 2.6.35-990-omap4 #9". I have spent 1 week on it with 2.6.35-990-omap4 #9 Please advise! Thanks. ---henry --- On Wed, 6/8/11, Liam Girdwood wrote: > From: Liam Girdwood > Subject: Re: [alsa-devel] asoc: no valid backend routes for PCM: SDP4430 Media > To: "hong zhang" > Cc: "alsa-devel@alsa-project.org" > Date: Wednesday, June 8, 2011, 9:22 AM > On 07/06/11 20:59, hong zhang wrote: > > Liam, > > > > Actually, I could not prove DMIC on OMAP4 blaze board > is working in both kernel 2.6.35 and 2.6.38 using arecord > and gstreamer-alsa. > > > > In 2.6.35, arecord returns 44 bytes with read error > > In 2.6.38, arecord collects native data. > > > > Gstreamer-alsa could not get voice after turning off > analog captures using amixer. > > > > Any information regarding DMIC on OMAP4? I see people > send DMIC patch to 2.6.38. > > > > DMIC works on OMAP4, can you try my branch :- > > https://gitorious.org/omap-audio/linux-audio/commits/lrg/topic/omap-asoc-next-3.1 > > Liam > >