From: Miroslav Skoric Subject: LinFBB in parallel with LinBPQ? Date: Thu, 05 Jun 2014 20:17:05 +0200 Message-ID: <5390B421.1080902@uns.ac.rs> Mime-Version: 1.0 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Sender: linux-hams-owner@vger.kernel.org List-ID: Content-Type: text/plain; charset="iso-8859-1"; format="flowed" To: linux-hams@vger.kernel.org Hi all, I wonder if it is possible to run LinFBB together with LinBPQ+Mail on=20 the same machine, and to make them both available to users of the node=20 and surrounding network (incl. possible forwarding in between the two=20 mail servers). So, I tried to adopt the procedure John had mentioned in= =20 his document 'Notes on installing and running LINBPQ', the part 'Runnin= g=20 Spider DX Cluster with LinBPQ'. Some details follow bellow. Until now, = I=20 have only managed to get LinFBB to be listed in LinBPQ nodes list, but=20 it is still not accessible. (The response is "Busy from=20 " although LinFBB is running and accessible through=20 the telnet port.) Probably I missed something in configuration of=20 addresses, callsigns, or so ... Suggestions welcomed. 73 de Misko Steps performed: modprobe netrom ifconfig nr0 down killall kissattach killall socat socat -d -d -ly pty,raw,echo=3D0,link=3Dcom10 pty,raw,echo=3D0,link=3Dc= om11& sleep 1 chmod a+rw com11 kissattach com10 bpq 10.1.1.1 nrattach netrom ifconfig nr0 10.0.0.2 up ax25d netromd -i -t 15 /usr/local/sbin/fbb cd /usr/local/linbpq =2E/linbpq mail (Related to the above steps: Sometimes it seems that the new port 'ASYN= C=20 com11 Chan A' is not initialized properly, so to fix that it is needed=20 to killall the processes above and to down the ports, and repeat it all= =20 once again, as follows:) root@localhost:/usr/local/linbpq# ./linbpq mail G8BPQ AX25 Packet Switch System Version 6.0.7.7 May 2014 Copyright =EF=BF=BD 2001-2014 John Wiseman G8BPQ Current Directory is /usr/local/linbpq Configuration file Preprocessor. Using Configuration file /usr/local/linbpq/bpq32.cfg Conversion (probably) successful PORTS 81729a0 LINKS 8174f91 DESTS 8176503 ROUTES 81792f3 L4 8179e92=20 BUFFERS 817ce64 Initialising Port 01 AXIP Initialising Port 02 Telnet Server Com Open Failed: No such file or directory Initialising Port 03 ASYNC com11 Chan A com11 could not be opened Starting Mail Config File is /usr/local/linbpq/linmail.cfg Config Processed Mail Started -- where the 2nd try responds with -- Initialising Port 01 AXIP Initialising Port 02 Telnet Server Initialising Port 03 ASYNC com11 Chan A Ok, now the ax25 kernel stuff: -- axports -- bpq YT7MPB-14 1200 236 6 Link to LinBPQ -- nrports -- netrom YT7MPB-8 F3 236 FBB -- nrbroadcast -- bpq 5 255 1 0 -- ax25d.conf -- (all lines start with # because LinBPQ does not use it, and I understoo= d=20 that FBB is controlled from outside of it) -- bpq32.cfg -- (note two applications: B3:YT7MPB-4 is BPQMail, F3:YT7MPB-8 is FBB) APPLICATIONS=3DBBS,FBB/C 3 YT7MPB-8 APPL1CALL=3DYT7MPB-4 APPL1ALIAS=3DB3 APPL1QUAL=3D255 APPL2CALL=3DYT7MPB-8 APPL2ALIAS=3DF3 APPL1QUAL=3D255 -- port.sys -- 0 0 0 0 0 0 0 0 00/01 ---- File-fwd. 1 7 1 bpq 250 2 5 10 15/15 XUY LinBPQ 2 30 2 0 230 2 25 5 15/30 TUY Telnet Ok. The situation at the local node R3:YT7MPB-3 includes the following: R3:YT7MPB-3} Nodes B1:YT7M B3:YT7MPB-4 B5:YT7MPB-6 F3:YT7MPB-8 R1:YT7MPB-1 R5:YT7MPB-5 So, as you can see, both B3:YT7MPB-4 (BPQMail) and F3:YT7MPB-8 (FBB) ar= e=20 in the list. Available commands and respective outputs are here: ? R3:YT7MPB-3} BBS FBB CONNECT BYE INFO NODES PORTS ROUTES USERS MHEARD bbs R3:YT7MPB-3} Connected to BBS [BPQ-6.0.7.7-B1FWIHJM$] Hello Misko. Latest Message is 3331, Last listed is 2723. 1532 Active Messages, 43 Unread Messages. Type H for help de YT7MPB> -- but -- fbb R3:YT7MPB-3} Busy from F3:YT7MPB-8 -- although telnet returns the following -- root@localhost:/usr/local/linbpq# telnet 192.168.3.1 6300 Trying 192.168.3.1... Connected to 192.168.3.1. Escape character is '^]'. YT7MPB BBS. TELNET Access Callsign : yt7mpb Password : xxxxxx Logon Ok. Type NP to change password. [FBB-7.05c-AB1FHMRX$] YT7MPB Mailbox, QTH Novi Sad. (2) YT7MPB BBS> Ok. Let's see the output of ifconfig: (There are two NIC's in that=20 Debian comp, both are linked to the other two comps in the LAN, running= =20 WinXP/BPQ32. The first NIC runs subnet 192.168.3.x and the second runs=20 192.168.4.x - however I have no clue if ax0 and nr0 should use their=20 respective addresses John had put in the manual, or something else ...) root@localhost:/usr/local/linbpq# ifconfig ax0 Link encap:AMPR AX.25 HWaddr YT7MPB-14 inet addr:10.1.1.1 Bcast:10.255.255.255 Mask:255.0.0.0 UP BROADCAST RUNNING MTU:236 Metric:1 RX packets:239 errors:0 dropped:0 overruns:0 frame:0 TX packets:188 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10 RX bytes:9039 (8.8 KiB) TX bytes:4959 (4.8 KiB) eth0 Link encap:Ethernet HWaddr 94:0c:6d:80:4d:83 inet addr:192.168.3.1 Bcast:192.168.3.255 Mask:255.255.255= =2E0 inet6 addr: fe80::960c:6dff:fe80:4d83/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9823 errors:0 dropped:0 overruns:0 frame:0 TX packets:6345 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:987771 (964.6 KiB) TX bytes:1287116 (1.2 MiB) Interrupt:11 Base address:0xe400 eth1 Link encap:Ethernet HWaddr 00:10:4b:2e:da:df inet addr:192.168.4.1 Bcast:192.168.4.255 Mask:255.255.255= =2E0 inet6 addr: fe80::210:4bff:fe2e:dadf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:7432 errors:0 dropped:0 overruns:0 frame:0 TX packets:5041 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:744470 (727.0 KiB) TX bytes:1043011 (1018.5 KiB) Interrupt:5 Base address:0xe800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1594 errors:0 dropped:0 overruns:0 frame:0 TX packets:1594 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:129848 (126.8 KiB) TX bytes:129848 (126.8 KiB) nr0 Link encap:AMPR NET/ROM HWaddr YT7MPB-8 inet addr:10.0.0.2 Mask:255.0.0.0 UP RUNNING NOARP MTU:236 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@localhost:/usr/local/linbpq# -- now the output of ps ax (snipped extras) -- 3331 pts/1 S 0:00 socat -d -d -ly pty,raw,echo=3D0,link=3Dcom10 pty,raw= ,ech 3337 ? S 0:00 kissattach com10 bpq 10.1.1.1 3347 ? S 0:00 ax25d 3349 ? S 0:00 netromd -i -t 15 3359 pts/1 S 0:00 /bin/sh /usr/local/sbin/fbb 3361 pts/1 S 1:36 /usr/local/sbin/xfbbd 4099 pts/1 Sl+ 0:28 ./linbpq mail Comments? -- To unsubscribe from this list: send the line "unsubscribe linux-hams" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html