From: santosh.shilimkar@ti.com (Santosh Shilimkar) Date: Mon, 14 Jul 2014 10:31:25 -0400 Subject: [PATCH v2] ARM: OMAP2+: l2c: squelch warning dump on power control setting In-Reply-To: References: Message-ID: <53C3E9BD.9010104@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Monday 14 July 2014 09:13 AM, Sekhar Nori wrote: > On OMAP SOCs using PL310 controllers, power_ctrl register is not > accessible from non-secure software even on PL310 versions which > support it. The secure code takes care of setting it up correctly > and power transitions are proven on these devices. > > For example, AM437x has L2C-310 version r3p3 and ROM code on that > device does not support writing to L2C-310 power control register. > The L2C driver, however, tries writing to this register for all > revisions >= r3p0. > > This leads to a warning dump on boot which leads most users to believe > that L2 cache is non-functional. > > Since the problem is understood, and cannot be addressed through > software, replace the warning with a pr_info() while maintaining the > WARN_ON() for other truly unexpected scenarios. > > Reported-by: Nishanth Menon > Tested-by: Felipe Balbi > Signed-off-by: Sekhar Nori > --- > Only description updated since v1 > Thanks for update. Acked-by: Santosh Shilimkar