From: Jean-Christophe DUBOIS Date: Fri, 08 Aug 2014 19:03:44 +0200 Subject: [Buildroot] [PATCH v6] bcache-tools: Adding package. In-Reply-To: <1407514262-18602-1-git-send-email-jcd@tribudubois.net> References: <1407514262-18602-1-git-send-email-jcd@tribudubois.net> Message-ID: <53E502F0.5060306@tribudubois.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net I did not add the Makefile patch for the man8 directory as I agree with Thomas that the bcache-tools package should be modified upstream to allow install without this dir. Meanwhile, we can add the man8 dir which is removed by BR afterward. JC Le 08/08/2014 06:11 PM, Jean-Christophe DUBOIS a ?crit : > This is the bcache tools, required to setup the linux bcache > feature of the Linux kernel. > > Signed-off-by: Jean-Christophe DUBOIS > --- > Changes v1 to v2 > * Remove 'support' word from comment statement in Config.in. > * Use github helper to get the project site instead of hardcoded URL. > Changes v2 to v3 > * Added bcache-tools description in Config help. > * Added bcache-tools URL in Config help. > * Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in Config. > * Added BR2_PACKAGE_UTIL_LINUX selection in Config. > * Added new requirements in Config comment. > * Use POST_EXTRACT_HOOKS to modify Makefile. > * Pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE). > * Create man8 dir as part of PRE_INSTALL_TARGET_HOOKS. > Changes v3 to v4 > * Move from .zip file to .tar.gz as download file in .mk file. > * Use complete git tag as version in .mk file. > * Remove explicit extract rule from .mk file (use implicite rule). > Changes v4 to v5 > * Remove explicit package name in .mk (rely on default behavior). > Changes v5 to v6 > * Switch spaces to tabs in Config.in > * Don't patch Makefile for pkg-config in .mk file. > --- > package/Config.in | 1 + > package/bcache-tools/Config.in | 22 ++++++++++++++++++++++ > package/bcache-tools/bcache-tools.mk | 31 +++++++++++++++++++++++++++++++ > 3 files changed, 54 insertions(+) > create mode 100644 package/bcache-tools/Config.in > create mode 100644 package/bcache-tools/bcache-tools.mk > > diff --git a/package/Config.in b/package/Config.in > index 4520ba6..dc2f418 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -280,6 +280,7 @@ endmenu > source "package/a10disp/Config.in" > source "package/acpid/Config.in" > source "package/avrdude/Config.in" > + source "package/bcache-tools/Config.in" > source "package/cdrkit/Config.in" > source "package/cryptsetup/Config.in" > source "package/cwiid/Config.in" > diff --git a/package/bcache-tools/Config.in b/package/bcache-tools/Config.in > new file mode 100644 > index 0000000..a3f7897 > --- /dev/null > +++ b/package/bcache-tools/Config.in > @@ -0,0 +1,22 @@ > +config BR2_PACKAGE_BCACHE_TOOLS > + bool "bcache tools" > + depends on BR2_PACKAGE_HAS_UDEV > + depends on BR2_LARGEFILE # util-linux > + depends on BR2_USE_WCHAR # util-linux > + depends on BR2_USE_MMU # util-linux (libblkid) > + select BR2_PACKAGE_UTIL_LINUX > + select BR2_PACKAGE_UTIL_LINUX_LIBUUID > + select BR2_PACKAGE_UTIL_LINUX_LIBBLKID > + help > + Bcache is a Linux kernel block layer cache. It allows one or > + more fast disk drives such as flash-based solid state drives (SSDs) > + to act as a cache for one or more slower hard disk drives. > + > + http://bcache.evilpiepirate.org/ > + > + This is the user space bcache tools, required to setup the linux > + bcache feature of the Linux kernel. > + > +comment "bcache-tools needs udev /dev management and a toolchain w/ largefile, wchar" > + depends on BR2_USE_MMU > + depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || !BR2_USE_WCHAR > diff --git a/package/bcache-tools/bcache-tools.mk b/package/bcache-tools/bcache-tools.mk > new file mode 100644 > index 0000000..880bf5e > --- /dev/null > +++ b/package/bcache-tools/bcache-tools.mk > @@ -0,0 +1,31 @@ > +################################################################################ > +# > +# bcache-tools > +# > +################################################################################ > + > +BCACHE_TOOLS_VERSION = v1.0.7 > +BCACHE_TOOLS_SITE = $(call github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION)) > +BCACHE_TOOLS_LICENSE = GPLv2 > +BCACHE_TOOLS_LICENSE_FILES = COPYING > +BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev > + > +# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow > +# the bcache-tools Makefile to alter CFLAGS > +define BCACHE_TOOLS_BUILD_CMDS > + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) > +endef > + > +# The bcache-tools Makefile expects the man8 directory to exist. > +define BCACHE_TOOLS_INSTALL_MAN8 > + $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8 > +endef > + > +BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8 > + > +define BCACHE_TOOLS_INSTALL_TARGET_CMDS > + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \ > + DESTDIR=$(TARGET_DIR) install > +endef > + > +$(eval $(generic-package))