From: lifshitz@compulab.co.il (Dmitry Lifshitz) Date: Mon, 08 Sep 2014 14:34:33 +0300 Subject: [PATCH 2/2] ARM: dts: omap5: Add dr_mode for dwc3 In-Reply-To: <20140416161619.GH28035@saruman.home> References: <1381402195-29257-1-git-send-email-kishon@ti.com> <1381402195-29257-2-git-send-email-kishon@ti.com> <52580F34.8030809@ti.com> <20140416161619.GH28035@saruman.home> Message-ID: <540D9449.3090008@compulab.co.il> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Felipe, Roger On 04/16/2014 07:16 PM, Felipe Balbi wrote: > On Fri, Oct 11, 2013 at 05:46:12PM +0300, Roger Quadros wrote: >> Hi, >> >> On 10/10/2013 01:49 PM, Kishon Vijay Abraham I wrote: >>> From: George Cherian >>> >>> Added dr_mode property in dwc3 and set its default mode to device. >> >> If there is a specific reason why this is not set to "otg", we need >> to explain it here. >> >> AFAIK the port is meant to be used as OTG port. > > we still don't have the workaround for dual role ports, I've been > working on it but still need to retest and make sure it's working fine > before merging upstream. > Does the OTG port suppose to work with OMAP5? I mean role switching mechanism? I'm testing kernel v3.16 with OMAP5 based board (CM-T54). If I set CONFIG_USB_DWC3_DUAL_ROLE, than nothing is going on when I plug some device/host cable into micro USB3.0 port (VBUS/ID detection with extcon events works fine). CONFIG_USB_DWC3_HOST/CONFIG_USB_DWC3_GADGET bring port to appropriate mode and it works. What is the purpose of setting dr_mode = "peripheral" in omap5.dtsi, since it is overridden by config options in dwc3_probe()? Thank you in advance for the assistance, Dmitry