From: emilio@elopez.com.ar (=?windows-1252?Q?Emilio_L=F3pez?=) Date: Sat, 13 Sep 2014 11:43:46 -0300 Subject: [PATCH 1/7] clk: sunxi: Add post clk divider for factor clocks In-Reply-To: <1410000448-9999-2-git-send-email-wens@csie.org> References: <1410000448-9999-1-git-send-email-wens@csie.org> <1410000448-9999-2-git-send-email-wens@csie.org> Message-ID: <54145822.4020607@elopez.com.ar> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, El 06/09/14 a las 07:47, Chen-Yu Tsai escibi?: > Some factor clocks, mostly PLLs, have an extra fixed divider just before > the clock output. Add an option to the factor clk driver config data to > specify this divider. > > Signed-off-by: Chen-Yu Tsai > --- > drivers/clk/sunxi/clk-factors.c | 3 +++ > drivers/clk/sunxi/clk-factors.h | 1 + > 2 files changed, 4 insertions(+) > > diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c > index 2057c8a..435111d 100644 > --- a/drivers/clk/sunxi/clk-factors.c > +++ b/drivers/clk/sunxi/clk-factors.c > @@ -64,6 +64,9 @@ static unsigned long clk_factors_recalc_rate(struct clk_hw *hw, > /* Calculate the rate */ > rate = (parent_rate * (n + config->n_start) * (k + 1) >> p) / (m + 1); > > + if (config->post_div) > + rate /= config->post_div; > + > return rate; > } > > diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h > index d2d0efa..ce70c65 100644 > --- a/drivers/clk/sunxi/clk-factors.h > +++ b/drivers/clk/sunxi/clk-factors.h > @@ -16,6 +16,7 @@ struct clk_factors_config { > u8 pshift; > u8 pwidth; > u8 n_start; > + u8 post_div; > }; > > struct clk_factors { > For the record, I liked your solution on[1] more, as it's in line with what we're doing on the other sunxi platforms, instead of adding features in factors to cover for some cases. But it's your and Maxime's call, as I haven't written any of the sun6i code so far. Cheers! Emilio [1] https://patchwork.kernel.org/patch/4228541/