From: kgene.kim@samsung.com (Kukjin Kim) Date: Sun, 14 Sep 2014 02:22:54 +0900 Subject: [PATCH V3 1/2] ARM: dts: Add DT changes for display on snow In-Reply-To: <1409567792-8281-1-git-send-email-ajaykumar.rs@samsung.com> References: <1409567792-8281-1-git-send-email-ajaykumar.rs@samsung.com> Message-ID: <54147D6E.2030103@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 09/01/14 19:36, Ajay Kumar wrote: > Add DT nodes for ptn3460 bridge chip and panel. > Add backlight enable pin and backlight power supply for pwm-backlight. > Also add bridge phandle needed by dp to enable display on snow. > > Signed-off-by: Ajay Kumar > --- > Changes since V1: > -- Remove "simple-panel" compatible string. > -- Use GPIO_ACTIVE_HIGH instead of 0. > -- Change panel node naming from "panel-simple" to "panel". > > Changes since V2: > -- Use proper compatible string: "auo,b116xw03" > > arch/arm/boot/dts/exynos5250-snow.dts | 41 ++++++++++++++++++--------------- > 1 file changed, 22 insertions(+), 19 deletions(-) > Applied this and 2nd one. BTW, I resolved conflict when I applied. Please check my tree and then if any problems, please let me know. Thanks, Kukjin