Return-path: Received: from vps.baanhofman.nl ([92.222.219.102]) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1Y38yP-0001p2-Rr for ath10k@lists.infradead.org; Mon, 22 Dec 2014 19:49:01 +0000 Received: from localhost (localhost.localdomain [127.0.0.1]) by vps.baanhofman.nl (Postfix) with ESMTP id 3BC0A1040C1A for ; Mon, 22 Dec 2014 20:48:34 +0100 (CET) Received: from vps.baanhofman.nl ([127.0.0.1]) by localhost (vps.baanhofman.nl [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 27I5489JbRjA for ; Mon, 22 Dec 2014 20:48:06 +0100 (CET) Received: from [IPv6:2001:470:7b66::ff:fe00:2] (unknown [IPv6:2001:470:7b66::ff:fe00:2]) by vps.baanhofman.nl (Postfix) with ESMTPSA id 5A35C1040BBC for ; Mon, 22 Dec 2014 20:48:06 +0100 (CET) Message-ID: <54987576.1010901@baanhofman.nl> Date: Mon, 22 Dec 2014 20:48:06 +0100 From: Wilco Baan Hofman MIME-Version: 1.0 Subject: num_rf_chains problem List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "ath10k" Errors-To: ath10k-bounces+kvalo=adurom.com@lists.infradead.org To: ath10k@lists.infradead.org Hi, I'm currently setting up openwrt with the latest git ath10k on the Engenius ESR1750. A couple of things are off: - My chip shipped with regdomain code 0x00 - OTP calibration is missing? - DFS pattern detector is not working, possibly because of OTP missing - num_rf_chains is reported as 2, which is wrong, it should be 3. I 'fixed' the driver with regdomain code 0x00 to map to my own country code, which is okay, that is completely legal here in Europe (and I have an amateur radio license anyway), but I gather that the eeprom is blank or something? The chip on board should be an QCA9880-BR4A, this is with skip_otp=1 and debug_mask=16383: [ 719.000000] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0 [ 719.120000] ath10k_pci 0000:00:00.0: Direct firmware load failed with error -2 [ 719.130000] ath10k_pci 0000:00:00.0: Falling back to user helper [ 720.250000] ath10k_pci 0000:00:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1 wmi 65.109.0.0 cal otp max_sta 128 [ 720.270000] ath10k_pci 0000:00:00.0: debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 [ 720.380000] ath10k_pci 0000:00:00.0: failed to initialise DFS pattern detector [ 720.380000] ath: EEPROM regdomain: 0x0 [ 720.380000] ath: EEPROM indicates default country code should be used [ 720.380000] ath: doing EEPROM country->regdmn map search [ 720.380000] ath: country maps to regdmn code: 0x37 [ 720.380000] ath: Country alpha2 being used: NL [ 720.380000] ath: Regpair used: 0x37 [ 891.950000] ath10k_pci 0000:00:00.0: pci probe [ 891.950000] ath10k_pci 0000:00:00.0: boot pci_mem 0xb0000000 [ 891.960000] ath10k_pci 0000:00:00.0: pci irq legacy interrupts 0 irq_mode 0 reset_mode 0 [ 891.970000] ath10k_pci 0000:00:00.0: boot hif power up [ 891.970000] ath10k_pci 0000:00:00.0: boot chip reset [ 891.970000] ath10k_pci 0000:00:00.0: boot warm reset [ 892.010000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 892.010000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 892.010000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 892.010000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 892.010000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 892.010000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 892.010000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 892.010000] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 892.010000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 892.020000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 892.030000] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 892.030000] ath10k_pci 0000:00:00.0: boot target initialised [ 892.050000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 892.050000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 892.050000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 892.050000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 892.050000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 892.050000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 892.050000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 892.050000] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 892.050000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 892.060000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 892.070000] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 892.070000] ath10k_pci 0000:00:00.0: boot target initialised [ 892.070000] ath10k_pci 0000:00:00.0: boot warm reset complete [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 892.070000] ath10k_pci 0000:00:00.0: boot chip reset complete (warm) [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 892.070000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 892.070000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 892.080000] ath10k_pci 0000:00:00.0: bmi get target info [ 892.080000] ath10k_pci 0000:00:00.0: Hardware name qca988x hw2.0 version 0x4100016c [ 892.080000] ath10k_pci 0000:00:00.0: Direct firmware load failed with error -2 [ 892.090000] ath10k_pci 0000:00:00.0: Falling back to user helper [ 892.140000] ath10k_pci 0000:00:00.0: trying fw api 3 [ 892.140000] ath10k_pci 0000:00:00.0: found fw version 10.2-00082-4-2 [ 892.140000] ath10k_pci 0000:00:00.0: found fw timestamp 1406283454 [ 892.140000] ath10k_pci 0000:00:00.0: found otp image ie (7205 B) [ 892.140000] ath10k_pci 0000:00:00.0: found fw image ie (228890 B) [ 892.140000] ath10k_pci 0000:00:00.0: found firmware features ie (1 B) [ 892.140000] ath10k_pci 0000:00:00.0: Enabling feature bit: 1 [ 892.140000] ath10k_pci 0000:00:00.0: Enabling feature bit: 2 [ 892.140000] ath10k_pci 0000:00:00.0: Enabling feature bit: 3 [ 892.140000] ath10k_pci 0000:00:00.0: Enabling feature bit: 4 [ 892.140000] ath10k_pci 0000:00:00.0: features [ 892.140000] ath10k_pci 0000:00:00.0: 00000000: 00 00 00 1e .... [ 892.140000] ath10k_pci 0000:00:00.0: using fw api 3 [ 892.140000] ath10k_pci 0000:00:00.0: bmi start [ 892.140000] ath10k_pci 0000:00:00.0: bmi write address 0x400800 length 4 [ 892.140000] ath10k_pci 0000:00:00.0: bmi read address 0x400810 length 4 [ 892.140000] ath10k_pci 0000:00:00.0: bmi write address 0x400810 length 4 [ 892.140000] ath10k_pci 0000:00:00.0: bmi write address 0x400844 length 4 [ 892.140000] ath10k_pci 0000:00:00.0: bmi write address 0x400904 length 4 [ 892.150000] ath10k_pci 0000:00:00.0: boot did not find a calibration file, try DT next: -2 [ 892.150000] ath10k_pci 0000:00:00.0: boot did not find DT entry, try OTP next: -2 [ 892.150000] ath10k_pci 0000:00:00.0: bmi read address 0x4008ac length 4 [ 892.150000] ath10k_pci 0000:00:00.0: boot push board extended data addr 0x0 [ 892.150000] ath10k_pci 0000:00:00.0: bmi read address 0x400854 length 4 [ 892.150000] ath10k_pci 0000:00:00.0: bmi write address 0x401cc0 length 2116 [ 892.150000] ath10k_pci 0000:00:00.0: bmi write address 0x400858 length 4 [ 892.150000] ath10k_pci 0000:00:00.0: boot upload otp to 0x1234 len 7205 [ 892.150000] ath10k_pci 0000:00:00.0: bmi fast download address 0x1234 buffer 0xc06f6038 length 7205 [ 892.150000] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234 [ 892.150000] ath10k_pci 0000:00:00.0: bmi lz data buffer 0xc06f6038 length 7204 [ 892.180000] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x87b79dc0 length 4 [ 892.180000] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0 [ 892.180000] ath10k_pci 0000:00:00.0: bmi execute address 0x1234 param 0x0 [ 892.290000] ath10k_pci 0000:00:00.0: bmi execute result 0x2 [ 892.290000] ath10k_pci 0000:00:00.0: boot otp execute result 2 [ 892.290000] ath10k_pci 0000:00:00.0: boot using calibration mode otp [ 892.290000] ath10k_pci 0000:00:00.0: boot uploading firmware image c06f7c68 len 228890 mode normal [ 892.290000] ath10k_pci 0000:00:00.0: bmi fast download address 0x1234 buffer 0xc06f7c68 length 228890 [ 892.290000] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234 [ 892.290000] ath10k_pci 0000:00:00.0: bmi lz data buffer 0xc06f7c68 length 228888 [ 893.280000] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x87b79dc0 length 4 [ 893.280000] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0 [ 893.280000] ath10k_pci 0000:00:00.0: bmi write address 0x400814 length 4 [ 893.280000] ath10k_pci 0000:00:00.0: pci hif set callbacks [ 893.280000] ath10k_pci 0000:00:00.0: pci hif get default pipe [ 893.280000] ath10k_pci 0000:00:00.0: pci hif map service [ 893.280000] ath10k_pci 0000:00:00.0: bmi done [ 893.280000] ath10k_pci 0000:00:00.0: htt tx max num pending tx 1424 [ 893.280000] ath10k_pci 0000:00:00.0: htt rx ring size 1024 fill_level 1000 [ 893.280000] ath10k_pci 0000:00:00.0: boot hif start [ 893.280000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 20 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 00 00 0c 00 00 00 00 00 01 00 02 00 00 07 16 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 01 00 00 00 .... [ 893.280000] ath10k_pci 0000:00:00.0: Target ready! transmit resources: 2 size:1792 [ 893.280000] ath10k_pci 0000:00:00.0: pci hif map service [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready [ 893.280000] ath10k_pci 0000:00:00.0: boot htc ep 0 ul polled 0 dl polled 0 [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service 'Control' eid 0 TX flow control disabled [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service HTT Data does not allocate target credits [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_build_tx_ctrl_skb: skb 86ea5600 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ec954c len 16 n_items 1 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 00 00 08 00 00 00 00 00 02 00 00 03 08 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 0 skb 86ea5600 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 20 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 00 00 0c 00 00 01 00 00 03 00 00 03 00 01 d0 07 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 00 00 00 00 .... [ 893.280000] ath10k_pci 0000:00:00.0: HTC Service HTT Data connect response: status: 0x0, assigned ep: 0x1 [ 893.280000] ath10k_pci 0000:00:00.0: pci hif map service [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service 'HTT Data' ul pipe 4 dl pipe 1 eid 1 ready [ 893.280000] ath10k_pci 0000:00:00.0: boot htc ep 1 ul polled 1 dl polled 0 [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service 'HTT Data' eid 1 TX flow control disabled [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_build_tx_ctrl_skb: skb 86ea56c0 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ec9a6c len 16 n_items 1 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 00 00 08 00 32 01 ff 7e 02 00 00 01 00 02 00 00 ....2..~........ [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 0 skb 86ea56c0 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 20 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 00 00 0c 00 00 02 00 00 03 00 00 01 00 02 b4 06 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 00 00 00 00 .... [ 893.280000] ath10k_pci 0000:00:00.0: HTC Service WMI connect response: status: 0x0, assigned ep: 0x2 [ 893.280000] ath10k_pci 0000:00:00.0: pci hif map service [ 893.280000] ath10k_pci 0000:00:00.0: boot htc service 'WMI' ul pipe 3 dl pipe 2 eid 2 ready [ 893.280000] ath10k_pci 0000:00:00.0: boot htc ep 2 ul polled 0 dl polled 0 [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_build_tx_ctrl_skb: skb 86ea5780 [ 893.280000] ath10k_pci 0000:00:00.0: HTC is using TX credit flow control [ 893.280000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ec9f8c len 20 n_items 1 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 00 00 0c 00 ff 02 00 00 05 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000010: 00 00 00 00 .... [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 0 skb 86ea5780 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx ce pipe 2 len 180 [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 02 00 ac 00 00 03 00 00 00 80 00 00 6d 00 00 41 ............m..A [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 01 00 00 00 03 00 00 00 00 00 00 00 0e 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000020: 07 00 00 00 0f 00 00 00 09 00 00 00 0f 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000060: 5b 08 00 00 b2 01 80 33 fa ff 00 00 3f 00 00 00 [......3....?... [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000070: 3f 00 00 00 00 00 00 00 7f 00 00 00 07 00 00 00 ?............... [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000080: c0 0b 00 00 0d f8 1f 00 08 09 00 00 ac 0a 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 00000090: 2e 13 00 00 d4 17 00 00 00 00 00 00 04 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 000000a0: 01 00 00 00 01 00 00 00 bc 01 00 00 02 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci rx: 000000b0: 00 00 00 00 .... [ 893.280000] ath10k_pci 0000:00:00.0: htc rx completion ep 2 skb 86ea3d80 [ 893.280000] ath10k_pci 0000:00:00.0: wmi svc: 00000000: 0e 00 00 00 07 00 00 00 0f 00 00 00 09 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: wmi svc: 00000010: 0f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: wmi svc: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: wmi svc: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: wmi mem_req_id 1 num_units 0 num_unit_info 2 unit size 444 actual units 145 [ 893.280000] ath10k_pci 0000:00:00.0: wmi event service ready min_tx_power 0x0000003f max_tx_power 0x0000003f ht_cap 0x0000085b vht_cap 0x338001b2 sw_ver0 0x4100006d sw_ver1 0x00000000 fw_build 0x00000000 phy_capab 0x00000003 num_rf_chains 0x00000002 eeprom_rd 0x00000000 num_mem_reqs 0x00000001 [ 893.280000] ath10k_pci 0000:00:00.0: firmware 10.2-00082-4-2 booted [ 893.280000] ath10k_pci 0000:00:00.0: wmi chunk 0 len 64380 requested, addr 0x6ed0000 [ 893.280000] ath10k_pci 0000:00:00.0: wmi init 10.2 [ 893.280000] ath10k_pci 0000:00:00.0: htc ep 2 consumed 1 credits (total 1) [ 893.280000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ecaaa0 len 176 n_items 1 [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 02 00 a8 00 00 00 00 00 00 a0 00 00 10 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000010: 90 00 00 00 02 00 00 00 00 01 00 00 10 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000020: 07 00 00 00 07 00 00 00 64 00 00 00 64 00 00 00 ........d...d... [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000030: 64 00 00 00 28 00 00 00 01 00 00 00 04 00 00 00 d...(........... [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000040: 02 00 00 00 02 00 00 00 08 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000050: 00 00 00 00 00 00 00 00 00 04 00 00 20 00 00 00 ............ ... [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000060: 00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000070: 90 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 00000090: 00 00 00 00 01 00 00 00 01 00 00 00 00 00 ed 06 ................ [ 893.280000] ath10k_pci 0000:00:00.0: pci tx data: 000000a0: 7c fb 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |............... [ 893.280000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 86ea5840 [ 893.290000] ath10k_pci 0000:00:00.0: pci rx ce pipe 2 len 140 [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 02 00 84 00 00 04 00 00 10 90 00 00 50 20 31 34 ............P 14 [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 35 20 56 20 31 36 20 54 20 34 34 33 0a 00 00 00 5 V 16 T 443.... [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 893.290000] ath10k_pci 0000:00:00.0: htc rx completion ep 2 skb 86ea3e40 [ 893.290000] ath10k_pci 0000:00:00.0: wmi print 'P 145 V 16 T 443' [ 893.290000] ath10k_pci 0000:00:00.0: pci rx ce pipe 2 len 140 [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 02 00 84 00 00 05 00 00 10 90 00 00 5f 77 6c 61 ............_wla [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 6e 5f 72 74 74 5f 65 6e 61 62 6c 65 00 00 00 00 n_rtt_enable.... [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 893.290000] ath10k_pci 0000:00:00.0: pci rx: 00000080: 00 00 00 00 00 00 00 00 00 00 00 00 ............ [ 893.290000] ath10k_pci 0000:00:00.0: htc rx completion ep 2 skb 86ea3f00 [ 893.290000] ath10k_pci 0000:00:00.0: wmi print '_wlan_rtt_enable' [ 893.300000] ath10k_pci 0000:00:00.0: pci rx ce pipe 2 len 32 [ 893.300000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 02 00 18 00 00 06 00 00 01 80 00 00 6d 00 00 41 ............m..A [ 893.300000] ath10k_pci 0000:00:00.0: pci rx: 00000010: 01 00 00 00 00 03 07 12 34 56 00 00 00 00 00 00 ........4V...... [ 893.300000] ath10k_pci 0000:00:00.0: htc rx completion ep 2 skb 86ea4000 [ 893.300000] ath10k_pci 0000:00:00.0: wmi event ready sw_version 1090519149 abi_version 1 mac_addr 00:03:07:12:34:56 status 0 [ 893.300000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ecc760 len 12 n_items 1 [ 893.300000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 01 00 04 00 86 00 cd e0 00 00 09 60 ...........` [ 893.300000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 12 [ 893.300000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 01 00 04 00 00 07 00 00 00 01 02 00 ............ [ 893.300000] ath10k_pci 0000:00:00.0: pci hif send complete check [ 893.300000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 1 skb 86ea5a80 [ 893.300000] ath10k_pci 0000:00:00.0: htc rx completion ep 1 skb 86463a80 [ 893.300000] ath10k_pci 0000:00:00.0: htt rx, msg_type: 0x0 [ 893.300000] ath10k_pci 0000:00:00.0: htt target version 2.1 [ 893.300000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06eccb80 len 48 n_items 1 [ 893.300000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 01 00 28 00 00 01 00 00 02 01 00 00 00 40 55 06 ..(..........@U. [ 893.300000] ath10k_pci 0000:00:00.0: pci tx data: 00000010: 00 f0 dc 06 00 04 80 07 ff ff e8 03 2e 00 3e 00 ..............>. [ 893.300000] ath10k_pci 0000:00:00.0: pci tx data: 00000020: 0f 00 19 00 03 00 0e 00 06 00 09 00 01 00 02 00 ................ [ 893.300000] ath10k_pci 0000:00:00.0: wmi disable pktlog [ 893.300000] ath10k_pci 0000:00:00.0: htc ep 2 consumed 1 credits (total 0) [ 893.300000] ath10k_pci 0000:00:00.0: HTC: endpoint 2 needs credit update [ 893.300000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ecccc0 len 12 n_items 1 [ 893.300000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 02 01 04 00 00 01 00 00 08 90 00 00 ............ [ 893.300000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 86ea5c00 [ 893.300000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 16 [ 893.300000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 00 02 08 00 08 08 00 00 01 04 00 01 02 02 b4 06 ................ [ 893.300000] ath10k_pci 0000:00:00.0: htc ep 2 got 2 credits (total 2) [ 893.300000] ath10k_pci 0000:00:00.0: qca988x hw2.0 (0x4100016c, 0x043202ff) fw 10.2-00082-4-2 api 3 htt 2.1 wmi 65.109.0.0 cal otp max_sta 128 [ 893.310000] ath10k_pci 0000:00:00.0: debug 1 debugfs 1 tracing 0 dfs 1 testmode 1 [ 893.320000] ath10k_pci 0000:00:00.0: htc ep 2 consumed 1 credits (total 1) [ 893.320000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ecd0e0 len 16 n_items 1 [ 893.320000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 02 00 08 00 00 02 00 00 4b 90 00 00 01 00 00 00 ........K....... [ 893.320000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 86ea5cc0 [ 893.320000] ath10k_pci 0000:00:00.0: pci rx ce pipe 1 len 12 [ 893.320000] ath10k_pci 0000:00:00.0: pci rx: 00000000: 00 00 04 00 00 09 00 00 06 00 00 01 ............ [ 893.320000] ath10k_pci 0000:00:00.0: boot suspend complete [ 893.320000] ath10k_pci 0000:00:00.0: wmi disable pktlog [ 893.320000] ath10k_pci 0000:00:00.0: htc ep 2 consumed 1 credits (total 0) [ 893.320000] ath10k_pci 0000:00:00.0: HTC: endpoint 2 needs credit update [ 893.320000] ath10k_pci 0000:00:00.0: pci tx item 0 paddr 0x06ecd500 len 12 n_items 1 [ 893.320000] ath10k_pci 0000:00:00.0: pci tx data: 00000000: 02 01 04 00 00 03 00 00 08 90 00 00 ............ [ 893.320000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 2 skb 86ea5d80 [ 893.320000] ath10k_pci 0000:00:00.0: boot hif stop [ 893.320000] ath10k_pci 0000:00:00.0: boot warm reset [ 893.360000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 893.360000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 893.360000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 893.360000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 893.360000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 893.360000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 893.360000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 893.360000] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 893.360000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 893.370000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 893.380000] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 893.380000] ath10k_pci 0000:00:00.0: boot target initialised [ 893.400000] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr a711c000 [ 893.400000] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 512 base_addr a70bc000 [ 893.400000] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 32 base_addr a73f0000 [ 893.400000] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr a73f1000 [ 893.400000] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 4096 base_addr a6e60000 [ 893.400000] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr a73f2000 [ 893.400000] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr a7392000 [ 893.400000] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 893.400000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 893.410000] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 893.420000] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 893.420000] ath10k_pci 0000:00:00.0: boot target initialised [ 893.420000] ath10k_pci 0000:00:00.0: boot warm reset complete [ 893.420000] ath10k_pci 0000:00:00.0: ath10k_htc_notify_tx_completion: ep 1 skb 86ea5b40 [ 893.420000] ath10k_pci 0000:00:00.0: boot hif power down [ 893.420000] ath10k_pci 0000:00:00.0: failed to initialise DFS pattern detector [ 893.420000] ath: EEPROM regdomain: 0x0 [ 893.420000] ath: EEPROM indicates default country code should be used [ 893.420000] ath: doing EEPROM country->regdmn map search [ 893.420000] ath: country maps to regdmn code: 0x37 [ 893.430000] ath: Country alpha2 being used: NL [ 893.430000] ath: Regpair used: 0x37 The resulting setup: Wiphy phy3 max # scan SSIDs: 16 max scan IEs length: 195 bytes Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports AP-side u-APSD. Available Antennas: TX 0x3 RX 0x3 (WRONG, should be 0x7, like on phy0) Configured Antennas: TX 0x3 RX 0x3 (WRONG, should be 0x7, like on phy0) Supported interface modes: * managed * AP * AP/VLAN * monitor Band 1: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) Band 2: Capabilities: 0x19e3 RX LDPC HT20/HT40 Static SM Power Save RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 7935 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-15 VHT Capabilities (0x338001b2): Max MPDU length: 11454 Supported Channel Width: neither 160 nor 80+80 RX LDPC short GI (80 MHz) TX STBC RX antenna pattern consistency TX antenna pattern consistency VHT RX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT RX highest supported: 0 Mbps VHT TX MCS set: 1 streams: MCS 0-9 2 streams: MCS 0-9 3 streams: not supported 4 streams: not supported 5 streams: not supported 6 streams: not supported 7 streams: not supported 8 streams: not supported VHT TX highest supported: 0 Mbps Frequencies: * 5180 MHz [36] (20.0 dBm) * 5200 MHz [40] (20.0 dBm) * 5220 MHz [44] (20.0 dBm) * 5240 MHz [48] (20.0 dBm) * 5260 MHz [52] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5280 MHz [56] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5300 MHz [60] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5320 MHz [64] (20.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5500 MHz [100] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5520 MHz [104] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5540 MHz [108] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5560 MHz [112] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5580 MHz [116] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5600 MHz [120] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5620 MHz [124] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5640 MHz [128] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5660 MHz [132] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5680 MHz [136] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5700 MHz [140] (27.0 dBm) (no IR, radar detection) DFS state: usable (for 1583 sec) DFS CAC time: 60000 ms * 5745 MHz [149] (disabled) * 5765 MHz [153] (disabled) * 5785 MHz [157] (disabled) * 5805 MHz [161] (disabled) * 5825 MHz [165] (disabled) valid interface combinations: * #{ AP } <= 8, total <= 8, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz, 40 MHz, 80 MHz } HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Wiphy phy1 max # scan SSIDs: 4 max scan IEs length: 2257 bytes Retry short limit: 7 Retry long limit: 4 Coverage class: 0 (up to 0m) Device supports AP-side u-APSD. Device supports T-DLS. Available Antennas: TX 0x7 RX 0x7 Configured Antennas: TX 0x7 RX 0x7 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO Band 1: Capabilities: 0x11ef RX LDPC HT20/HT40 SM Power Save disabled RX HT20 SGI RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-23 Frequencies: * 2412 MHz [1] (20.0 dBm) * 2417 MHz [2] (20.0 dBm) * 2422 MHz [3] (20.0 dBm) * 2427 MHz [4] (20.0 dBm) * 2432 MHz [5] (20.0 dBm) * 2437 MHz [6] (20.0 dBm) * 2442 MHz [7] (20.0 dBm) * 2447 MHz [8] (20.0 dBm) * 2452 MHz [9] (20.0 dBm) * 2457 MHz [10] (20.0 dBm) * 2462 MHz [11] (20.0 dBm) * 2467 MHz [12] (20.0 dBm) * 2472 MHz [13] (20.0 dBm) * 2484 MHz [14] (disabled) valid interface combinations: * #{ managed } <= 2048, #{ AP, mesh point } <= 8, #{ P2P-client, P2P-GO } <= 1, #{ IBSS } <= 1, total <= 2048, #channels <= 1, STA/AP BI must match * #{ WDS } <= 2048, total <= 2048, #channels <= 1, STA/AP BI must match * #{ IBSS, AP, mesh point } <= 1, total <= 1, #channels <= 1, STA/AP BI must match, radar detect widths: { 20 MHz (no HT), 20 MHz } HT Capability overrides: * MCS: ff ff ff ff ff ff ff ff ff ff * maximum A-MSDU length * supported channel width * short GI for 40 MHz * max A-MPDU length exponent * min MPDU start spacing Any suggestions on how to approach this? -- Wilco Baan Hofman _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k