From: hauke@hauke-m.de (Hauke Mehrtens) Date: Sun, 18 Jan 2015 13:05:14 +0100 Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWC-1000 In-Reply-To: <1420666490-29276-1-git-send-email-riproute@gmail.com> References: <1420666490-29276-1-git-send-email-riproute@gmail.com> Message-ID: <54BBA17A.3040807@hauke-m.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Dan, This looks ok to me. I haven't noticed before, but you should also send patches for BCM5301X to the linux arm mailing list at linux-arm-kernel at lists.infradead.org . Could you please send this patch one more time and then in addition to the arm mailing list. Hauke On 01/07/2015 10:34 PM, Dan Haab wrote: > From: Dan Haab > > Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only > unusual thing in its DTS file is "ubi" partition on NAND flash. > > Signed-off-by: Dan Haab Signed-off-by: Hauke Mehrtens > --- > Hello Hauke, > > We believe you are going to collect BCM5301X DTS changes for 3.20. > Please consider following patch. > --- > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts | 60 ++++++++++++++++++++++++++++ > 2 files changed, 61 insertions(+) > create mode 100644 arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 2ca4bab..a03afbd 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb > dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb > dtb-$(CONFIG_ARCH_BCM_5301X) += \ > bcm4708-buffalo-wzr-1750dhp.dtb \ > + bcm4708-luxul-xwc-1000.dtb \ > bcm4708-netgear-r6250.dtb \ > bcm4708-netgear-r6300-v2.dtb \ > bcm47081-asus-rt-n18u.dtb \ > diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts > new file mode 100644 > index 0000000..946c728 > --- /dev/null > +++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts > @@ -0,0 +1,60 @@ > +/* > + * Broadcom BCM470X / BCM5301X ARM platform code. > + * DTS for Luxul XWC-1000 > + * > + * Copyright 2014 Luxul Inc. > + * > + * Licensed under the GNU/GPL. See COPYING for details. > + */ > + > +/dts-v1/; > + > +#include "bcm4708.dtsi" > + > +/ { > + compatible = "luxul,xwc-1000", "brcm,bcm4708"; > + model = "Luxul XWC-1000 (BCM4708)"; > + > + chosen { > + bootargs = "console=ttyS0,115200"; > + }; > + > + memory { > + reg = <0x00000000 0x08000000>; > + }; > + > + axi at 18000000 { > + nand at 28000 { > + reg = <0x00028000 0x1000>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition at 0 { > + label = "ubi"; > + reg = <0x00000000 0x08000000>; > + }; > + }; > + }; > + > + leds { > + compatible = "gpio-leds"; > + > + status { > + label = "bcm53xx:green:status"; > + gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "timer"; > + }; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + restart { > + label = "Reset"; > + linux,code = ; > + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; > + }; > + }; > +}; >