From: Guenter Roeck Date: Tue, 27 Jan 2015 14:07:03 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable Message-Id: <54C79B87.8040607@roeck-us.net> List-Id: References: <1421409922-28299-1-git-send-email-robert.rosengren@axis.com> <54B92596.2040206@roeck-us.net> <20150116183020.GA6262@roeck-us.net> <54C74567.9020201@axis.com> In-Reply-To: <54C74567.9020201@axis.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Robert Rosengren , Jean Delvare , "lm-sensors@lm-sensors.org" Cc: Johan Adolfsson , "linux-kernel@vger.kernel.org" On 01/26/2015 11:59 PM, Robert Rosengren wrote: > On 01/16/2015 07:30 PM, Guenter Roeck wrote: >> I sent a couple of patches a minute ago which should take care of the issue. >> Would be great if you can test it. > I applied the v2 versions of the patches for a quick test, but it was not successful. Haven't done any further investigation on what the problem might be, but when trying to read the sysfs driver I get "read error: No such device or address". > > The sysfs path have moved with the REGMAP settings, from /sys/bus/i2c/devices//in0_input to /sys/bus/i2c/devices//hwmon/hwmon0/in0_input. > > Any ideas? Haven't had REGMAP configured in my kernel earlier, might it be some specific configuration I miss? > Did you configure REGMAP ? That would now be necessary. The "official" sysfs path would be /sys/class/hwmon/hwmonX (hwmon0 in your case). Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors