From: Guenter Roeck Date: Thu, 29 Jan 2015 14:10:27 +0000 Subject: Re: [lm-sensors] [PATCH] hwmon: (ads7828) Make sample interval configurable Message-Id: <54CA3F53.70107@roeck-us.net> List-Id: References: <1421409922-28299-1-git-send-email-robert.rosengren@axis.com> <54B92596.2040206@roeck-us.net> <20150116183020.GA6262@roeck-us.net> <54C74567.9020201@axis.com> <54C79B87.8040607@roeck-us.net> <4BEA3FF3CAA35E408EA55C7BE2E61D05943B6DD753@xmail3.se.axis.com> <20150127200553.GA5689@roeck-us.net> <20150127233455.0c62457e@endymion.delvare> <54C86035.9080605@roeck-us.net> <54C87F3C.2020105@axis.com> <54C8F73D.4040808@roeck-us.net> <54C9DA9D.3010802@axis.com> <54C9DBD5.5030808@roeck-us.net> <54CA226E.6080505@axis.com> In-Reply-To: <54CA226E.6080505@axis.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Robert Rosengren , Jean Delvare Cc: "lm-sensors@lm-sensors.org" , Johan Adolfsson , "linux-kernel@vger.kernel.org" On 01/29/2015 04:07 AM, Robert Rosengren wrote: > On 01/29/2015 08:05 AM, Guenter Roeck wrote: >> Ah, don't bother then. I should hopefully get the samples in a couple of days. > > i2cdump was easily built, so here is the output: > 0,8 1,9 2,a 3,b 4,c 5,d 6,e 7,f > 00: 1301 1301 1301 1301 1301 1301 1301 1301 > 08: 4101 6901 6a01 6901 6901 6901 6901 6901 > 10: 0200 0100 0100 0100 0100 0100 0100 0100 > 18: 0100 0100 0100 0100 0100 0100 0100 0100 > 20: 0200 0100 0100 0100 0100 0100 0100 0100 > 28: 0100 0100 0100 0100 0100 0100 0100 0100 > 30: 0200 0100 0100 0100 0100 0100 0100 0100 > 38: 0100 0100 0100 0100 0100 0100 0100 0100 > 40: 0000 0000 0000 0000 0000 0000 0000 0000 > 48: 0000 0000 0000 0000 0000 0000 0000 0000 > 50: 0200 0100 0100 0100 0100 0100 0100 0100 > 58: 0100 0100 0100 0100 0100 0100 0200 0100 > 60: 0100 0100 0100 0100 0100 0100 0100 0100 > 68: 0100 0100 0100 0100 0100 0100 0100 0100 > 70: 0200 0100 0100 0100 0100 0100 0100 0100 > 78: 0100 0100 0100 0100 0100 0100 0100 0100 > 80: 6501 2401 1701 1401 1301 1301 1301 1301 > 88: 4201 6901 6901 6901 6901 6901 6901 6901 > 90: 0200 0100 0100 0100 0100 0100 0100 0100 > 98: 0100 0100 0100 0100 0100 0100 0100 0100 > a0: 6701 2501 1901 1601 1501 1501 1501 1501 > a8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 > b0: 0200 0100 0100 0100 0100 0100 0100 0100 > b8: 0100 0100 0100 0100 0100 0100 0100 0100 > c0: 0200 0100 0100 0100 0100 0100 0100 0100 > c8: 0100 0100 0100 0100 0100 0100 0100 0100 > d0: 0200 0100 0100 0100 0100 0100 0100 0100 > d8: 0100 0100 0100 0100 0100 0100 0100 0100 > e0: 6701 2801 1b01 1701 1601 1501 1501 1501 > e8: 4401 6c01 6c01 6c01 6c01 6c01 6c01 6c01 > f0: 0200 0100 0100 0100 0100 0100 0100 0100 > f8: 0100 0100 0100 0100 0100 0100 0100 0100 > > I checked the value at 0x84 (channel 0, and using single-ended and external reference). I got 222 when reading from corresponding sysfs, and 0x131 * lsb_resolution (806) / 1000 is 222 in decimal. So it seems as data above is correct. > > Is the data what you expected? > Yes and no. With the above data, the old version of the driver (non-regmap) works as expected. The driver supporting regmap, however, needs the byte swap to work correctly. Guenter _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors