From: Larry Finger Date: Sat, 07 Feb 2015 11:16:45 -0600 Subject: [ath9k-devel] [PATCH] * Add support for Philips (or NXP) PTA01 Wireless Adapter In-Reply-To: <1423305971-8360-1-git-send-email-leon.nardella@gmail.com> References: <1423305971-8360-1-git-send-email-leon.nardella@gmail.com> Message-ID: <54D6487D.1020607@lwfinger.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: ath9k-devel@lists.ath9k.org On 02/07/2015 04:46 AM, Leon Nardella wrote: > Signed-off-by: Leon Nardella > --- > drivers/net/wireless/ath/ath9k/hif_usb.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c > index 8e7153b..10c02f5 100644 > --- a/drivers/net/wireless/ath/ath9k/hif_usb.c > +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c > @@ -40,6 +40,7 @@ static struct usb_device_id ath9k_hif_usb_ids[] = { > { USB_DEVICE(0x0cf3, 0xb003) }, /* Ubiquiti WifiStation Ext */ > { USB_DEVICE(0x0cf3, 0xb002) }, /* Ubiquiti WifiStation */ > { USB_DEVICE(0x057c, 0x8403) }, /* AVM FRITZ!WLAN 11N v2 USB */ > + { USB_DEVICE(0x0471, 0x209e) }, /* Philips (or NXP) PTA01 */ > > { USB_DEVICE(0x0cf3, 0x7015), > .driver_info = AR9287_USB }, /* Atheros */ Leon, Your patch is correct, but your subject and commit message needs a little work. When I add a new USB ID for a driver, my subject usually includes the driver name followed by a colon, and the "Add new USB ID". In your case, that would be "[PATCH] ath9k_htc: Add new USB ID". Then in the commit message I include the make and model of the device, and some indication of why that device ID should be added. For example, was that ID found in a Windows driver? Finally, indicate that the patch has been tested. Such a statement should not be necessary, but recently there have been a number of patches submitted that have not been tested on real hardware. Larry