From: Brian Smucker Date: Wed, 11 Feb 2015 09:14:19 -0800 Subject: [U-Boot] Can I load uEnv.txt conditionally, based on the boot source? In-Reply-To: References: <54DAADCA.2070308@bsmucker.eu.org> Message-ID: <54DB8DEB.1050808@bsmucker.eu.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, That would be the most obvious thing, wouldn't it. I thought of that, but am not sure of the answer in u-boot. Thanks, Brian On 2/11/2015 12:09 AM, Joe Hershberger wrote: > > On Tue, Feb 10, 2015 at 7:18 PM, Brian Smucker > wrote: > > > > Hello, > > > > I was wondering if there is a way to tell what the boot source is? > > > > My am335x SOC can boot to the mmc or the flash, based on the status > of a digital line. I would like to load the uEnv.txt, only if booting > from SD card (mmc). I notice at least in some codebases that the > automatic loading of uEnv.txt is based on whether the SD card is > available, not whether we are currently booting from the SD card. > > > > Is there a way to sense which we are booting from? > > Are you able to read the same digital line that the SoC is using to > decide?