From: Gabriel Huau Date: Wed, 25 Feb 2015 08:27:44 -0800 Subject: [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support In-Reply-To: References: <1424037328-31636-1-git-send-email-contact@huau-gabriel.fr> Message-ID: <54EDF800.8060907@huau-gabriel.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Bin, On 02/24/2015 11:52 PM, Bin Meng wrote: > Hi Gabriel, > > On Mon, Feb 16, 2015 at 5:55 AM, Gabriel Huau wrote: >> Configure the pinctrl as it required to make some IO controllers >> working (USB/UART/I2C/...). >> The idea would be in the next version to modify the pch GPIO driver and >> configure these pins through the device tree. >> >> These modifications are ported from the coreboot project. >> >> Signed-off-by: Gabriel Huau >> --- >> arch/x86/cpu/baytrail/Makefile | 1 + >> arch/x86/cpu/baytrail/gpio.c | 206 +++++++++++++++ >> arch/x86/include/asm/arch-baytrail/gpio.h | 364 ++++++++++++++++++++++++++ >> arch/x86/include/asm/arch-baytrail/iomap.h | 73 ++++++ >> arch/x86/include/asm/arch-baytrail/irq.h | 119 +++++++++ >> arch/x86/include/asm/arch-baytrail/irqroute.h | 67 +++++ >> arch/x86/include/asm/arch-baytrail/pci_devs.h | 144 ++++++++++ >> arch/x86/include/asm/arch-baytrail/pmc.h | 253 ++++++++++++++++++ >> board/intel/minnowmax/minnowmax.c | 212 +++++++++++++++ >> include/configs/minnowmax.h | 11 + >> 10 files changed, 1450 insertions(+) >> create mode 100644 arch/x86/cpu/baytrail/gpio.c >> create mode 100644 arch/x86/include/asm/arch-baytrail/iomap.h >> create mode 100644 arch/x86/include/asm/arch-baytrail/irq.h >> create mode 100644 arch/x86/include/asm/arch-baytrail/irqroute.h >> create mode 100644 arch/x86/include/asm/arch-baytrail/pci_devs.h >> create mode 100644 arch/x86/include/asm/arch-baytrail/pmc.h >> > [snip] > >> diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h >> index 823e051..738c6fa 100644 >> --- a/include/configs/minnowmax.h >> +++ b/include/configs/minnowmax.h >> @@ -69,4 +69,15 @@ >> /* Avoid a warning in the Realtek Ethernet driver */ >> #define CONFIG_SYS_CACHELINE_SIZE 16 >> >> +/* >> + * Baytrail has 3 GPIOs bank over PCI, there is no >> + * driver at the moment so let's disable the command >> + * and the default x86 driver to avoid any collision >> + * with the GPIO mapping code. >> + * @TODO: adding a baytrail-gpio driver and configure >> + * the muxing through the device tree >> + */ >> +#undef CONFIG_INTEL_ICH6_GPIO >> +#undef CONFIG_CMD_GPIO >> + > Why undef these two? The BayTrail SoC does support GPIO banks in the > legacy bridge. I might misunderstood the GPIO subsystem but I thought there was 2 banks available through the PCU iLB GPIO controller which contains the SCORE and SSUS (102 / 44 pins). The intel_ich6_gpio has a limitation of 32 GPIOs per bank and I thought it was just a different controller from the Baytrail, but if I can use it to control all the GPIOs + doing the IO mapping, I'll be glad to do it! > >> #endif /* __CONFIG_H */ >> -- > Regards, > Bin Regards, Gabriel