From: gabriel huau Date: Thu, 26 Feb 2015 23:54:33 -0800 Subject: [U-Boot] [PATCH] x86: minnowmax: add GPIO mapping support In-Reply-To: References: <1424037328-31636-1-git-send-email-contact@huau-gabriel.fr> <54EDF800.8060907@huau-gabriel.fr> Message-ID: <54F022B9.8060000@huau-gabriel.fr> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Bin, On 02/26/2015 07:30 PM, Bin Meng wrote: > Hi Gabriel, > > On Thu, Feb 26, 2015 at 12:27 AM, Gabriel Huau wrote: >> Hi Bin, >> >> >> On 02/24/2015 11:52 PM, Bin Meng wrote: >>> Hi Gabriel, >>> >>> On Mon, Feb 16, 2015 at 5:55 AM, Gabriel Huau >>> wrote: >>>> Configure the pinctrl as it required to make some IO controllers >>>> working (USB/UART/I2C/...). >>>> The idea would be in the next version to modify the pch GPIO driver and >>>> configure these pins through the device tree. >>>> >>>> These modifications are ported from the coreboot project. >>>> >>>> Signed-off-by: Gabriel Huau >>>> --- >>>> arch/x86/cpu/baytrail/Makefile | 1 + >>>> arch/x86/cpu/baytrail/gpio.c | 206 +++++++++++++++ >>>> arch/x86/include/asm/arch-baytrail/gpio.h | 364 >>>> ++++++++++++++++++++++++++ >>>> arch/x86/include/asm/arch-baytrail/iomap.h | 73 ++++++ >>>> arch/x86/include/asm/arch-baytrail/irq.h | 119 +++++++++ >>>> arch/x86/include/asm/arch-baytrail/irqroute.h | 67 +++++ >>>> arch/x86/include/asm/arch-baytrail/pci_devs.h | 144 ++++++++++ >>>> arch/x86/include/asm/arch-baytrail/pmc.h | 253 ++++++++++++++++++ >>>> board/intel/minnowmax/minnowmax.c | 212 +++++++++++++++ >>>> include/configs/minnowmax.h | 11 + >>>> 10 files changed, 1450 insertions(+) >>>> create mode 100644 arch/x86/cpu/baytrail/gpio.c >>>> create mode 100644 arch/x86/include/asm/arch-baytrail/iomap.h >>>> create mode 100644 arch/x86/include/asm/arch-baytrail/irq.h >>>> create mode 100644 arch/x86/include/asm/arch-baytrail/irqroute.h >>>> create mode 100644 arch/x86/include/asm/arch-baytrail/pci_devs.h >>>> create mode 100644 arch/x86/include/asm/arch-baytrail/pmc.h >>>> >>> [snip] >>> >>>> diff --git a/include/configs/minnowmax.h b/include/configs/minnowmax.h >>>> index 823e051..738c6fa 100644 >>>> --- a/include/configs/minnowmax.h >>>> +++ b/include/configs/minnowmax.h >>>> @@ -69,4 +69,15 @@ >>>> /* Avoid a warning in the Realtek Ethernet driver */ >>>> #define CONFIG_SYS_CACHELINE_SIZE 16 >>>> >>>> +/* >>>> + * Baytrail has 3 GPIOs bank over PCI, there is no >>>> + * driver at the moment so let's disable the command >>>> + * and the default x86 driver to avoid any collision >>>> + * with the GPIO mapping code. >>>> + * @TODO: adding a baytrail-gpio driver and configure >>>> + * the muxing through the device tree >>>> + */ >>>> +#undef CONFIG_INTEL_ICH6_GPIO >>>> +#undef CONFIG_CMD_GPIO >>>> + >>> Why undef these two? The BayTrail SoC does support GPIO banks in the >>> legacy bridge. >> I might misunderstood the GPIO subsystem but I thought there was 2 banks >> available through the PCU iLB GPIO controller which contains the SCORE and >> SSUS (102 / 44 pins). >> The intel_ich6_gpio has a limitation of 32 GPIOs per bank and I thought it >> was just a different controller from the Baytrail, but if I can use it to >> control all the GPIOs + doing the IO mapping, I'll be glad to do it! > I checked the BayTrail datasheet. Its GPIO is in the iLB (legacy > bridge), which is the same as other IA chipset (Ivybridge, > TunnelCreek, Quark). It has 4 banks in core domain and 2 banks in sus > domain. So 6 banks in total. You need define 6 gpio nodes in the > minnowmax board dts file. You should be able to use the existing gpio > driver to configure. Thanks for the clarification! Actually, I saw it today when I was doing some tests and I configured the 6 banks in the devices tree. I also fixed the GPIO base address to 0x48 but I got some issues like the fact I'm reading only 0 from all the registers. The registers are configured to be in the IO Space (0x500), I checked the PCI configuration space to make sure that everything is enabled correctly, but I'm still missing something. Once I'll be able to use these GPIOs, I will update the entire patch to remove the port from Coreboot as this is not necessary. >>>> #endif /* __CONFIG_H */ >>>> -- > Regards, > Bin Regards, Gabriel