From: j.anaszewski@samsung.com (Jacek Anaszewski) Date: Mon, 22 Jun 2015 16:33:08 +0200 Subject: [RESEND PATCH 4/4] leds: leds-ns2: depends on MACH_ARMADA_370 In-Reply-To: <1434640650-28086-5-git-send-email-simon.guinot@sequanux.org> References: <1434640650-28086-1-git-send-email-simon.guinot@sequanux.org> <1434640650-28086-5-git-send-email-simon.guinot@sequanux.org> Message-ID: <55881CA4.9080306@samsung.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Simon, On 06/18/2015 05:17 PM, Simon Guinot wrote: > The leds-ns2 driver is also used by the n090401 board (Seagate NAS > 4-Bay), which is based on the Marvell Armada-370 SoC. > > Then this patch allows to select the leds-ns2 driver if MACH_ARMADA_370 > is enabled. Additionally, this also updates the Kconfig help message. > > Signed-off-by: Simon Guinot > --- > drivers/leds/Kconfig | 12 ++++++++---- > 1 file changed, 8 insertions(+), 4 deletions(-) > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig > index 966b9605f5f0..68fd6b2b12be 100644 > --- a/drivers/leds/Kconfig > +++ b/drivers/leds/Kconfig > @@ -431,12 +431,16 @@ config LEDS_MC13783 > config LEDS_NS2 > tristate "LED support for Network Space v2 GPIO LEDs" > depends on LEDS_CLASS > - depends on MACH_KIRKWOOD > + depends on MACH_KIRKWOOD || MACH_ARMADA_370 > default y > help > - This option enable support for the dual-GPIO LED found on the > - Network Space v2 board (and parents). This include Internet Space v2, > - Network Space (Max) v2 and d2 Network v2 boards. > + This option enables support for the dual-GPIO LEDs found on the > + following LaCie/Seagate boards: > + > + Network Space v2 (and parents: Max, Mini) > + Internet Space v2 > + d2 Network v2 > + n090401 (Seagate NAS 4-Bay) > > config LEDS_NETXBIG > tristate "LED support for Big Network series LEDs" > Acked-by: Jacek Anaszewski -- Best Regards, Jacek Anaszewski