From: Eugen.Hristev at microchip.com Date: Tue, 6 Oct 2020 06:39:32 +0000 Subject: [PATCH 4/7] ARM: dts: sam9x60: use u-boot,dm-pre-reloc In-Reply-To: <1601909923-31137-5-git-send-email-claudiu.beznea@microchip.com> References: <1601909923-31137-1-git-send-email-claudiu.beznea@microchip.com> <1601909923-31137-5-git-send-email-claudiu.beznea@microchip.com> Message-ID: <5599e3d2-a032-536f-8cc0-a7684b44d290@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 05.10.2020 17:58, Claudiu Beznea wrote: > Use u-boot,dm-pre-reloc for slow xtal and main xtal. > > Signed-off-by: Claudiu Beznea > --- Hi Claudiu, For this patch and the following DT patches: the u-boot,dm-pre-reloc property must be added to the file sam9x60ek-u-boot.dtsi (or sam9x60-u-boot.dtsi if needed to be created ) Eugen > arch/arm/dts/sam9x60.dtsi | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm/dts/sam9x60.dtsi b/arch/arm/dts/sam9x60.dtsi > index 51de586e1900..a4e2576d8e0f 100644 > --- a/arch/arm/dts/sam9x60.dtsi > +++ b/arch/arm/dts/sam9x60.dtsi > @@ -30,11 +30,13 @@ > slow_xtal: slow_xtal { > compatible = "fixed-clock"; > #clock-cells = <0>; > + u-boot,dm-pre-reloc; > }; > > main_xtal: main_xtal { > compatible = "fixed-clock"; > #clock-cells = <0>; > + u-boot,dm-pre-reloc; > }; > }; > >