From: =?utf-8?B?5ZC057qi6Z2S?= Date: Fri, 18 Dec 2015 09:12:54 +0800 Subject: [U-Boot] help - u-boot on powerpc qemu In-Reply-To: References: <566D6494.8060700@fiberhome.com.cn> Message-ID: <56735D96.2060000@fiberhome.com.cn> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de thank MiaoYan! i try to do something as you said ,now can found e1000-nic,but when i ping another ipaddr,an error msg show as below: U-Boot 2016.01-rc2 (Dec 13 2015 - 21:06:24 +0800) CPU: Unknown, Version: 0.0, (0x00000000) Core: e500, Version: 2.2, (0x80210022) Clock Configuration: CPU0:400 MHz, CCB:400 MHz, DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = 0x00) L1: D-cache 32 KiB enabled I-cache 32 KiB enabled DRAM: 1 GiB L2: disabled Using default environment PCI: base address e0008000 00:01.0 - 8086:100e - Network controller PCI1: Bus 00 - 00 In: serial Out: serial Err: serial Net: e1000: 00:00:00:00:00:00 e1000#0 Error: e1000#0 address not set. Hit any key to stop autoboot: 0 WARNING: adjusting available memory to 30000000 Wrong Image Format for bootm command ERROR: can't get kernel image! => setenv ipAddr 10.33.152.222 => ping 10.33.152.2 e1000: e1000#0: ERROR: Hardware Initialization Failed ping failed; host 10.33.152.2 is not alive => ============================================================================== ? 2015?12?14? 10:23, Miao Yan ??: > 2015-12-13 20:29 GMT+08:00 ??? : >> hello,i am using u-boot on powerpc qemu,my u-boot version is >> u-boot-2016.01-rc2,i make uboot as below: >> >> cd u-boot-2016.01-rc2 >> make clean >> make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- qemu-ppce500_defconfig >> make ARCH=powerpc CROSS_COMPILE=powerpc-linux-gnu- >> >> then ,t execute u-boot bay qemu as below: >> >> qemu-system-ppc -M ppce500 -serial stdio -kernel u-boot -m 1024 >> >> uboot show some msg as below: >> >> U-Boot 2016.01-rc2 (Dec 13 2015 - 19:54:13 +0800) >> >> CPU: Unknown, Version: 0.0, (0x00000000) >> Core: e500, Version: 3.0, (0x80210030) >> Clock Configuration: >> CPU0:400 MHz, >> CCB:400 MHz, >> DDR:200 MHz (400 MT/s data rate), LBC: unknown (LCRR[CLKDIV] = 0x00) >> L1: D-cache 32 KiB enabled >> I-cache 32 KiB enabled >> DRAM: 1 GiB >> L2: disabled >> Using default environment >> >> >> PCI: base address e0008000 >> 00:01.0 - 1af4:1000 - Network controller >> PCI1: Bus 00 - 00 >> >> In: serial >> Out: serial >> Err: serial >> Net: No ethernet found. >> Hit any key to stop autoboot: 0 >> WARNING: adjusting available memory to 30000000 >> Wrong Image Format for bootm command >> ERROR: can't get kernel image! >> => >> >> why no net card? can you help me? > > Because you didn't specify any emulated NIC in qemu command line. > > Here's a link maybe you can refer: > > https://www.suse.com/documentation/sles11/book_kvm/data/cha_qemu_running_networking.html > > > See the "Defining a Network Interface Card" section. The commonly > used model with U-Boot should be e1000 or rtl8139 (rtl8139 is > not converted to driver model though) > > > > Miao > > >> thanks you!!! >> >> _______________________________________________ >> U-Boot mailing list >> U-Boot at lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot