From: slash.tmp@free.fr (Mason) Date: Wed, 3 Feb 2016 16:35:10 +0100 Subject: Plain DFS (no voltage scaling) In-Reply-To: <20160203021052.GK31828@vireshk> References: <56B11B67.3090600@free.fr> <20160203021052.GK31828@vireshk> Message-ID: <56B21E2E.1070606@free.fr> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 03/02/2016 03:10, Viresh Kumar wrote: > On 02-02-16, 22:11, Mason wrote: >> Hello, >> >> I plan to enable the on-demand governor on the tango platform: >> https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/arch/arm/boot/dts/tango4-smp8758.dtsi >> >> I found the cpufreq-dt binding doc: >> >> https://www.kernel.org/doc/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt >> https://www.kernel.org/doc/Documentation/devicetree/bindings/opp/opp.txt >> >> Something is not clear to me: >> >> If my platform cannot scale the voltage, what information >> should I put in the voltage part of the DT? > > Wouldn't matter if there is no regulator. i.e. you should keep 0, but > even if they have something non-zero, core code will ignore it. But > yeah, it makes sense to keep it zero. Hmmm, I am missing something obvious. My config contains: CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPUFREQ_DT=y Yet, neither dt_cpufreq_probe() nor cpufreq_init() are being called. Could someone please point to my mistake? Regards.