Return-path: Received: from yw-out-2324.google.com ([74.125.46.29]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1L0cgX-0003aO-Vm for linux-dvb@linuxtv.org; Thu, 13 Nov 2008 14:56:38 +0100 Received: by yw-out-2324.google.com with SMTP id 3so373580ywj.41 for ; Thu, 13 Nov 2008 05:56:33 -0800 (PST) Message-ID: <57808ff0811130556l4c182aaak5d95be36c2ff2e07@mail.gmail.com> Date: Thu, 13 Nov 2008 14:56:31 +0100 From: "Rune Evjen" To: "Tomas Drajsajtl" In-Reply-To: <001101c93ce7$23bcfdb0$7f79a8c0@tommy> MIME-Version: 1.0 References: <001101c93ce7$23bcfdb0$7f79a8c0@tommy> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Any DVB-C tuner with working CAM? List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: multipart/mixed; boundary="===============1091829664==" Mime-version: 1.0 Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: --===============1091829664== Content-Type: multipart/alternative; boundary="----=_Part_4990_27355454.1226584591985" ------=_Part_4990_27355454.1226584591985 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi, I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.netalong with the DVB-C card. Apparently they only ship rev 1.2 ( ( http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM --Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well. My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay. My configuration works in mythtv and (by recollection) mplayer and xine. I get the same dmesg output as you for the tt-dvbpci card. I also use a Terratec Cinergy-C Card using the mantis drivers but the CI interface of that card is not yet supported as well. Rune 2008/11/2 Tomas Drajsajtl > Hello, > I have bought and tested two DVB-C cards which are supported according to > http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards > Both are perfectly working with FTA but none with the CAM. > > 1. TechnoTrend Premium DVB-C 2300 > > DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X) > adapter has MAC addr = .... > dvb-ttpci: gpioirq unknown type=0 len=0 > dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app > 80002622 > dvb-ttpci: firmware @ card 3 supports CI link layer interface > dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415 > dvb_ttpci: saa7113 not accessible. > saa7146_vv: saa7146 (0): registered device video2 [v4l2] > saa7146_vv: saa7146 (0): registered device vbi2 [v4l2] > DVB: registering frontend 3 (ST STV0297 DVB-C)... > > Applications detect the inserted CAM even if the CAM is not inserted ;-) > but > even when it is, no scrambled channel is decrypted. > > 2. Technisat CableStar HD2 > > found a VP-2040 PCI DVB-C device on (01:02.0), > Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64 > memory: 0xefeff000, mmio: 0xffffc20000aee000 > MAC Address=[....] > mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536 > mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000 > DVB: registering new adapter (Mantis dvb adapter) > > It says that an unsupported CAM is inserted. :-( Then I found in this > mailing list that the mantis CI-CAM support is not finalized yet. I > appreciate the work that Manu does with the mantis driver and I trust that > it will be supported in the comming months but I would expect that the Wiki > page mentioned above will have also the information about not yet supported > CI! :-( > > So I have the CAM, two DVB-C cards but can't watch the channels I pay every > month... I spent many days with Google to find out a working solution with > these two or another card but unsuccessfully. Can somebody please advice me > a DVB-C card with CI which _is on market_ and does work with Technisat > Conax > CAM? > > Thanks in advance, > Tomas > > > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ------=_Part_4990_27355454.1226584591985 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Content-Disposition: inline Hi,

I use the TT 2300-C Premium card with a Conax CAM (rev 1.1) - 4.00e and this works fine with my cable provider. The CAM was ordered from www.dvb-shop.net along with the DVB-C card.

Apparently they only ship rev 1.2 ( (http://www.dvbshop.net/product_info.php/info/p20_Conax-CAM--Rev--1-2----4-00e.html) now which also supports the bitrates of HDTV, but I have not tested this CAM, although dvb-shop states that rev 1.2 is compatible as well.

My cable provider is not Technisat, but I guess that if Technisat encryption is based on Conax 4.00e then the CAM should be okay.

My configuration works in mythtv and (by recollection) mplayer and xine.

I get the same dmesg output as you for the tt-dvbpci card.

I also use a Terratec Cinergy-C Card using the mantis drivers but the CI interface of that card is not yet supported as well.

Rune

2008/11/2 Tomas Drajsajtl <linux-dvb@drajsajtl.cz>
Hello,
I have bought and tested two DVB-C cards which are supported according to
http://www.linuxtv.org/wiki/index.php/DVB-C_PCI_Cards
Both are perfectly working with FTA but none with the CAM.

1. TechnoTrend Premium DVB-C 2300

DVB: registering new adapter (Technotrend/Hauppauge WinTV Nexus-CA rev1.X)
adapter has MAC addr = ....
dvb-ttpci: gpioirq unknown type=0 len=0
dvb-ttpci: info @ card 3: firm f0240009, rtsl b0250018, vid 71010068, app
80002622
dvb-ttpci: firmware @ card 3 supports CI link layer interface
dvb-ttpci: DVB-C analog module @ card 3 detected, initializing MSP3415
dvb_ttpci: saa7113 not accessible.
saa7146_vv: saa7146 (0): registered device video2 [v4l2]
saa7146_vv: saa7146 (0): registered device vbi2 [v4l2]
DVB: registering frontend 3 (ST STV0297 DVB-C)...

Applications detect the inserted CAM even if the CAM is not inserted ;-) but
even when it is, no scrambled channel is decrypted.

2. Technisat CableStar HD2

found a VP-2040 PCI DVB-C device on (01:02.0),
   Mantis Rev 1 [1ae4:0002], irq: 18, latency: 64
   memory: 0xefeff000, mmio: 0xffffc20000aee000
   MAC Address=[....]
mantis_alloc_buffers (0): DMA=0x7d820000 cpu=0xffff81007d820000 size=65536
mantis_alloc_buffers (0): RISC=0x7e50e000 cpu=0xffff81007e50e000 size=1000
DVB: registering new adapter (Mantis dvb adapter)

It says that an unsupported CAM is inserted. :-( Then I found in this
mailing list that the mantis CI-CAM support is not finalized yet. I
appreciate the work that Manu does with the mantis driver and I trust that
it will be supported in the comming months but I would expect that the Wiki
page mentioned above will have also the information about not yet supported
CI! :-(

So I have the CAM, two DVB-C cards but can't watch the channels I pay every
month... I spent many days with Google to find out a working solution with
these two or another card but unsuccessfully. Can somebody please advice me
a DVB-C card with CI which _is on market_ and does work with Technisat Conax
CAM?

Thanks in advance,
Tomas


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

------=_Part_4990_27355454.1226584591985-- --===============1091829664== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb --===============1091829664==--