From: icenowy@aosc.xyz (Icenowy Zheng)
Date: Sat, 11 Mar 2017 03:25:02 +0800
Subject: [PATCH v2 05/11] Documentation: DT: bindings: mfd: add A33 GPADC
 binding
In-Reply-To: <20170310103921.19469-6-quentin.schulz@free-electrons.com>
References: <20170310103921.19469-1-quentin.schulz@free-electrons.com>
 <20170310103921.19469-6-quentin.schulz@free-electrons.com>
Message-ID: <5798131489173902@web12o.yandex.ru>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org



10.03.2017, 18:56, "Quentin Schulz" <quentin.schulz@free-electrons.com>:
> This patch adds documentation for the A33 GPADC binding.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> ---
>
> added in v2
>
> ?.../devicetree/bindings/mfd/sun4i-gpadc.txt | 59 ++++++++++++++++++++++
> ?1 file changed, 59 insertions(+)
> ?create mode 100644 Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> new file mode 100644
> index 0000000..17242c8
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -0,0 +1,59 @@
> +Allwinner SoCs' GPADC Device Tree bindings
> +------------------------------------------
> +The Allwinner SoCs all have an ADC that can also act as a thermal sensor
> +and sometimes as a touchscreen controller.
> +
> +Required properties:
> + - compatible: "sun8i-a33-gpadc-iio",
> + - reg: mmio address range of the chip,
> + - #thermal-sensor-cells: shall be 0,
> + - #io-channel-cells: shall be 0,
> +
> +Example:
> + rtp: rtp at 01c25000 {

I think we'd better call it ths.

And can you make thermal-sensor-cells become 1?

Maxime Ripard wants to base H3/H5/A64 thermal driver on this patchset, and
for H5/A64 there's 2/3 thermal sensors.

Thus for A33/H3 we will have thermal-sensor-cells to 1, but only have
<&ths 0>.

> + compatible = "allwinner,sun8i-a33-gpadc-iio";
> + reg = <0x01c25000 0x100>;
> + #thermal-sensor-cells = <0>;
> + #io-channel-cells = <0>;
> + };
> +
> +sun4i, sun5i and sun6i SoCs are also supported via the older binding:
> +
> +sun4i resistive touchscreen controller
> +--------------------------------------
> +
> +Required properties:
> + - compatible: "allwinner,sun4i-a10-ts", "allwinner,sun5i-a13-ts" or
> + "allwinner,sun6i-a31-ts"
> + - reg: mmio address range of the chip
> + - interrupts: interrupt to which the chip is connected
> + - #thermal-sensor-cells: shall be 0
> +
> +Optional properties:
> + - allwinner,ts-attached : boolean indicating that an actual touchscreen
> + is attached to the controller
> + - allwinner,tp-sensitive-adjust : integer (4 bits)
> + adjust sensitivity of pen down detection
> + between 0 (least sensitive) and 15
> + (defaults to 15)
> + - allwinner,filter-type : integer (2 bits)
> + select median and averaging filter
> + samples used for median / averaging filter
> + 0: 4/2
> + 1: 5/3
> + 2: 8/4
> + 3: 16/8
> + (defaults to 1)
> +
> +Example:
> +
> + rtp: rtp at 01c25000 {
> + compatible = "allwinner,sun4i-a10-ts";
> + reg = <0x01c25000 0x100>;
> + interrupts = <29>;
> + allwinner,ts-attached;
> + #thermal-sensor-cells = <0>;
> + /* sensitive/noisy touch panel */
> + allwinner,tp-sensitive-adjust = <0>;
> + allwinner,filter-type = <3>;
> + };
> --
> 2.9.3
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel