From: Stefan Roese Date: Wed, 23 Oct 2019 04:36:48 +0200 Subject: [U-Boot] [PATCH v2 3/6] arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node In-Reply-To: <20191010055207.26831-4-vigneshr@ti.com> References: <20191010055207.26831-1-vigneshr@ti.com> <20191010055207.26831-4-vigneshr@ti.com> Message-ID: <57a94f4d-e96f-dfa1-cde8-3569ebfa95dc@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Vignesh, On 10.10.19 07:52, Vignesh Raghavendra wrote: > Add DT node for HyperBus Memory Controller in the FSS. On J721e, its not > possible to use OSPI0 and HBMC simultaneously as they are muxed within > the Flash Subsystem hence disable HBMC by default as keep OSPI enabled. > Bootloader will fixup DT when it detects HyperFlash instead of OSPI. > > Signed-off-by: Vignesh Raghavendra > --- > arch/arm/dts/k3-j721e-mcu-wakeup.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi > index c217866e9a2b..8838771dc1a1 100644 > --- a/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi > +++ b/arch/arm/dts/k3-j721e-mcu-wakeup.dtsi > @@ -80,4 +80,30 @@ > clocks = <&k3_clks 149 0>; > clock-names = "fclk"; > }; > + > + fss: fss at 47000000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x0 0x47000000 0x0 0x100>; > + #address-cells = <2>; > + #size-cells = <2>; > + ranges; > + > + hbmc_mux: hbmc-mux { > + compatible = "mmio-mux"; > + #mux-control-cells = <1>; > + mux-reg-masks = <0x4 0x2>; /* HBMC select */ > + }; > + > + hbmc: hyperbus at 47034000 { > + compatible = "ti,j721e-hbmc", "ti,am654-hbmc"; > + reg = <0x0 0x47034000 0x0 0x100>, > + <0x5 0x00000000 0x1 0x0000000>; > + power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <2>; > + #size-cells = <1>; > + mux-controls = <&hbmc_mux 0>; > + assigned-clocks = <&k3_clks 102 0>; > + assigned-clock-rates = <166666666>; > + }; > + }; > }; > This patch does not apply any more. Could you please rebase and resubmit? Thanks, Stefan