From: Thirupathaiah Annapureddy Date: Mon, 28 Sep 2020 18:56:45 -0700 Subject: [PATCH] net: ftgmac100: Add support for board specific PHY interface address In-Reply-To: <20200818000826.29865-1-thiruan@linux.microsoft.com> References: <20200818000826.29865-1-thiruan@linux.microsoft.com> Message-ID: <59932155-3d33-035d-6a50-d2252520774a@linux.microsoft.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Tom/Joe, Is this going to be applied to u-boot/next or u-boot-net? Best Regards, Thiru On 8/17/2020 5:08 PM, Thirupathaiah Annapureddy wrote: > ftgmac100 driver is using hard-coded PHY interface address of zero. > Each board can have different PHY interface address (phy_addr). > This commit modifies the driver to make use of board specific address > by leveraging CONFIG_PHY_ADDR. > > Signed-off-by: Thirupathaiah Annapureddy > --- > drivers/net/ftgmac100.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/net/ftgmac100.c b/drivers/net/ftgmac100.c > index 5676a5b3ba..00bda24f1f 100644 > --- a/drivers/net/ftgmac100.c > +++ b/drivers/net/ftgmac100.c > @@ -551,6 +551,10 @@ static int ftgmac100_probe(struct udevice *dev) > priv->max_speed = pdata->max_speed; > priv->phy_addr = 0; > > +#ifdef CONFIG_PHY_ADDR > + priv->phy_addr = CONFIG_PHY_ADDR; > +#endif > + > ret = clk_enable_bulk(&priv->clks); > if (ret) > goto out; >