From: Stephen Boyd Subject: Re: [PATCH RFC 05/14] dt-bindings/interrupt-controller: pdc: add SPI config register Date: Fri, 20 Sep 2019 15:20:25 -0700 Message-ID: <5d8550aa.1c69fb81.39edc.83fc@mx.google.com> References: <20190829181203.2660-1-ilina@codeaurora.org> <20190829181203.2660-6-ilina@codeaurora.org> <5d6d1b72.1c69fb81.ee88.efcf@mx.google.com> <102c9268-c4ce-6133-3b0a-67c2fcba1e7a@arm.com> <20190903170722.GA31716@codeaurora.org> <5d71a247.1c69fb81.2146f.7ed2@mx.google.com> <20190913195326.GA3293@codeaurora.org> <20190917215020.GA15853@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable Return-path: In-Reply-To: <20190917215020.GA15853@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Lina Iyer Cc: Rob Herring , evgreen@chromium.org, linus.walleij@linaro.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, bjorn.andersson@linaro.org, mkshah@codeaurora.org, linux-gpio@vger.kernel.org, rnayak@codeaurora.org, devicetree@vger.kernel.org, maz@kernel.org, sibis@codeaurora.org List-Id: devicetree@vger.kernel.org Quoting Lina Iyer (2019-09-17 14:50:20) > On Fri, Sep 13 2019 at 13:53 -0600, Lina Iyer wrote: > >On Thu, Sep 05 2019 at 18:03 -0600, Stephen Boyd wrote: > >>Quoting Lina Iyer (2019-09-03 10:07:22) > >>>On Mon, Sep 02 2019 at 07:58 -0600, Marc Zyngier wrote: > >>>>On 02/09/2019 14:38, Rob Herring wrote: > >>>>> On Thu, Aug 29, 2019 at 12:11:54PM -0600, Lina Iyer wrote: > >>>These are not GIC registers but located on the PDC interface to the GI= C. > >>>They may or may not be secure access controlled, depending on the SoC. > >>> > >> > >>It looks like it falls under this "mailbox" device which is really the > >>catch all bucket for bits with no home besides they're related to the > >>apps CPUs/subsystem. > >> > >Thanks for pointing to this. > >> apss_shared: mailbox@17990000 { > >> compatible =3D "qcom,sdm845-apss-shared"; > >> reg =3D <0 0x17990000 0 0x1000>; > >But this doesn't seem correct. The registers in this page are all not > >mailbox door bell registers. We should restrict the space allocated to > >the mbox to 0xC or something, definitely, not the whole page. They all > >cannot be treated as a mailbox registers. Well the binding is already done and this is the compatible string for this node and register region. Sounds like this node is a mailbox plus some more stuff in the same page. > >> #mbox-cells =3D <1>; > >> }; > >> > >>Can you point to this node with a phandle and then parse the reg > >>property out of it to use in the scm readl/writel APIs? Maybe it can be > >>a two cell property with <&apps_shared 0xf0> to indicate the offset to > >>the registers to read/write? In non-secure mode presumably we need to > >>also write these registers? Good news is that there's a regmap for this > >>driver already, so maybe that can be acquired from the pdc driver. > >> > >The register space collection seems to be mix of different types of > >application processor registers that should probably not be grouped up > >under one subsystem. A single regmap doesn't seem correct either. Why isn't a single regmap correct? The PDC driver should be able to use it to read/write into this register space. The lock on the regmap will need to be changed to a raw lock though for RT. Otherwise it looks OK to me.