From: Heinrich Schuchardt Date: Thu, 21 Nov 2019 22:59:29 +0100 Subject: [U-Boot] Maximum size of u-boot.imx for TBS2910 board In-Reply-To: <20191121201253.GN971@bill-the-cat> References: <20191121201253.GN971@bill-the-cat> Message-ID: <5e69c39f-a36a-bcd3-8020-e752ded84166@gmx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 11/21/19 9:12 PM, Tom Rini wrote: > On Thu, Nov 21, 2019 at 09:09:29PM +0100, Heinrich Schuchardt wrote: >> Hello Soeren, >> >> when trying to add support for function key support in the USB keyboard >> driver u-boot.imx for the TBS2910 surpassed the maximum size for u-boot.imx. >> https://travis-ci.org/marex/u-boot-usb/builds/614059004 >> >> Do you remember why on the TBS2910 board this size is limited to >> 0x5fc00? Other i.MX6 boards like the Wandboard allow a much larger >> u-boot.imx. >> >> The limit is defined here: >> include/configs/tbs2910.h:80: >> #define CONFIG_BOARD_SIZE_LIMIT 392192 /* (CONFIG_ENV_OFFSET - 1024) */ >> >> Could the value CONFIG_ENV_OFFSET=0x60000 be enlarged? >> >> Many i.MX6 defconfigs use CONFIG_ENV_OFFSET=0xC0000. > > The nature of these boards (aimed at end users) means that we just do > not want to / cannot really move the stored environment. Thanks! > Another possibility would be to reduce the image size by using CONFIG_REGEX=n which should be fine for a board with only one supported network interface. Best regards Heinrich