From: ron_madrid at sbcglobal.net Date: Thu, 16 Jul 2009 14:23:08 -0700 (PDT) Subject: [U-Boot] Initial environment variables Message-ID: <618394.56077.qm@web83508.mail.sp1.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de --- On Thu, 7/16/09, Ben Warren wrote: > From: Ben Warren > Subject: Re: [U-Boot] Initial environment variables > To: "Ron Madrid" > Cc: u-boot at lists.denx.de, "Mike Frysinger" > Date: Thursday, July 16, 2009, 2:08 PM > Ron Madrid wrote: > > --- On Thu, 7/16/09, Mike Frysinger > wrote: > > > > > >> the board maintainer decides the default env > values, not > >> board users. Ben's comment was probably on > the assumption that you are in the > >> latter category. > >> > > > > Ah, that could be why. Thankfully I am the > maintainer for the board. So I > > am going to assume then that it would be OK for me to > add these variable > > settings to my board's include/configs file and submit > a patch for it, > > unless I here other objections. > > > > Ron > > > No, there should be no default net parameters, because > you're making likely-bogus assumptions about the network > that your board's going to go into. Just because your > LAN uses '192.168.0.x' doesn't mean anybody else's > does. It's even worse for MAC addresses - what if I > buy two of your boards and plug them into the same > switch? If the addresses are identical all sorts of > bad things can happen. Not to mention that public MAC > addresses are assigned (and paid for) and should be > guaranteed to be unique. And private (bit 41 set) > addresses are used in many different ways. One systems > company that I worked at would program these dynamically > based on which shelf/slot the board was plugged into. > It's best to fail loudly (a printf stating that MAC > addresses haven't been programmed) than to silently cause > network issues. I could go on and on, but hopefully > you get the point. I do understand your points. I am confused then as to why there are around 100 different board configurations that include these variables. Ron