From: tike64 Date: Thu, 20 Sep 2007 04:51:04 -0700 (PDT) Subject: [U-Boot-Users] isp116x-hcd and usb_storage In-Reply-To: <87vea7rrw6.fsf@denx.de> Message-ID: <693552.46647.qm@web59205.mail.re1.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de --- Markus Klotzb?cher wrote: > tike64 writes: > > Clearly the delay is now at a wrong place. It most propably should > > be in isp116x-hcd.c. But as I don't know too much about usb or scsi > > I agree (although it wouldn't be the first first delay in > usb_storage, would it). Maybe Rodolfo, who ported this driver has an > idea where to start looking? Hopefully Rodolfo is reading this list... I have made a little progress. I think the delay was needed because the stick simply needed more time. In certain occasions the stick NAKed (PTD remained active) the transactions so long that isp116x_submit_job returned an error. There was 10 retries and I increased it to 500 (in effect 500ms timeout) and now it seems to work much better. At least one problem remains, though. I have tested it with a 165KB file and one out of about five fatloads fails. Completion codes of the first failed PTDs are 6 (PIDCheckFailure), 5 (DeviceNotResponding) and then always 0xf (propably device NAKing). After 'usb reset' it works again for a while. Now I don't understand how transactions can fail with 6 or 5 occasionally. Are sticks known to be unreliable or should I suspect my hardware? What should be done after that kind of failure? -- Timo ____________________________________________________________________________________ Building a website is a piece of cake. Yahoo! Small Business gives you all the tools to get online. http://smallbusiness.yahoo.com/webhosting