From: Sean Anderson Date: Wed, 29 Jul 2020 13:32:05 -0400 Subject: [PATCH 1/1] doc: riscv: debug UART for MAIX In-Reply-To: <20200729172338.137970-1-xypron.glpk@gmx.de> References: <20200729172338.137970-1-xypron.glpk@gmx.de> Message-ID: <6a0515eb-e309-0ed5-1ad4-7107d7105f8a@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 7/29/20 1:23 PM, Heinrich Schuchardt wrote: > Provide the required settings for the debug UART. > > Signed-off-by: Heinrich Schuchardt > --- > doc/board/sipeed/maix.rst | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/doc/board/sipeed/maix.rst b/doc/board/sipeed/maix.rst > index c235cb44a8..b1894f3a6f 100644 > --- a/doc/board/sipeed/maix.rst > +++ b/doc/board/sipeed/maix.rst > @@ -262,6 +262,16 @@ Boot Sequence > stage. > 8. The boot hart jumps to ``0x80000000``. > > +Debug UART > +^^^^^^^^^^ > + > +The Debug UART is provided with the following settings:: > + > + CONFIG_DEBUG_UART=y > + CONFIG_DEBUG_UART_SIFIVE=y > + CONFIG_DEBUG_UART_BASE=0x38000000 > + CONFIG_DEBUG_UART_CLOCK=390000000 > + > Resetting the board > ^^^^^^^^^^^^^^^^^^^ > > -- > 2.27.0 > Reviewed-by: Sean Anderson