From: Bitan Biswas Subject: Re: [PATCH] arm64: tegra: Disable XUSB support on Jetson TX2 Date: Mon, 6 May 2019 21:19:50 -0700 Message-ID: <6a439eb8-dac4-9c86-e8bb-78723ea10be1@nvidia.com> References: <20190506164121.4507-1-thierry.reding@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii"; Format="flowed" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20190506164121.4507-1-thierry.reding@gmail.com> Content-Language: en-US List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Thierry Reding Cc: linux-tegra@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Jonathan Hunter List-Id: linux-tegra@vger.kernel.org On 5/6/19 9:41 AM, Thierry Reding wrote: > From: Thierry Reding > > The recently introduced XUSB support for Jetson TX2 is causing boot, CPU > hotplug and suspend/resume failures according to several reports. > > Temporarily work around this by disabling the XUSB controller and XUSB > pad controller nodes in device tree, while we figure out what's causing > this. > > Reported-by: Bitan Biswas > Reported-by: Jonathan Hunter > Signed-off-by: Thierry Reding > --- > arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts > index 75ee6cf1e1b4..14d7fea82daf 100644 > --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts > +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts > @@ -59,7 +59,7 @@ > }; > > padctl@3520000 { > - status = "okay"; > + status = "disabled"; > > avdd-pll-erefeut-supply = <&vdd_1v8_pll>; > avdd-usb-supply = <&vdd_3v3_sys>; > @@ -137,7 +137,7 @@ > }; > > usb@3530000 { > - status = "okay"; > + status = "disabled"; > > phys = <&{/padctl@3520000/pads/usb2/lanes/usb2-0}>, > <&{/padctl@3520000/pads/usb2/lanes/usb2-1}>, > Verified with this patch that Jetson TX2 core power is again turning off and suspend mode is entered with additional Tegra186 suspend patches from below patch list under review : http://patchwork.ozlabs.org/project/linux-tegra/list/?series=78866