From: Eugen.Hristev at microchip.com Date: Thu, 14 Jan 2021 10:19:38 +0000 Subject: [PATCH 0/2] add support for dll setup on ksz9131 In-Reply-To: <1606987111-19754-1-git-send-email-claudiu.beznea@microchip.com> References: <1606987111-19754-1-git-send-email-claudiu.beznea@microchip.com> Message-ID: <6eb1db92-ad8a-3ec1-58fa-0ca1ae7cda96@microchip.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 03.12.2020 11:18, Claudiu Beznea wrote: > Hi, > > KSZ9131 has an internal DLL used to add proper delay on TX/RX lines > to confirm with RGMII timings. The series add support for this. Along > with this I included a typo patch. > > Thank you, > Claudiu Beznea > > Claudiu Beznea (2): > net: phy: micrel: add support for DLL setup on ksz9131 > net: phy: micrel: fix typo > > drivers/net/phy/micrel_ksz90x1.c | 65 ++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 63 insertions(+), 2 deletions(-) > Applied to u-boot-atmel/master , thanks !