From: Joris Offouga Date: Sun, 24 Nov 2019 21:06:32 +0100 Subject: [U-Boot] Pico-imx7d and imx7d sabre Break on 2020.01-rc3 Message-ID: <71ef1e36-c311-9da8-7d27-b6ce1db8ece7@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: u-boot@lists.denx.de Anatolij, Fabio I just compiled a fresh U-Boot with U-Boot master and It looks like commit f0b54d (video: mxsfb: Configure the clock after eLCDIF reset") [1] breaks my Pico-imx7d and imx7d-Sabre. see logs after: U-Boot 2020.01-rc3-00489-g47b48fe186 (Nov 24 2019 - 15:18:23 +0100) CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU:   Commercial temperature grade (0C to 95C) at 36C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in secure mode DRAM:  1 GiB MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK Video: 480x272x24 After revert it  : U-Boot 2020.01-rc3-00490-g6bebc83c0a (Nov 24 2019 - 15:51:16 +0100) CPU:   Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) CPU:   Commercial temperature grade (0C to 95C) at 36C Reset cause: POR Model: Freescale i.MX7 SabreSD Board Board: i.MX7D SABRESD in secure mode DRAM:  1 GiB MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK Video: 480x272x24 In:    serial Out:   serial Err:   serial Net:   FEC0 Hit any key to stop autoboot:  0 So, can you consider this commit 'not applicable' for next release ? [1]- https://gitlab.denx.de/u-boot/u-boot/commit/ec3dcea7447031463643c33143b3a5f027f0b54d Best Regards, Joris