From: kasp Date: Sun, 09 Jan 2005 11:36:10 +0000 Subject: [LARTC] Slow large pings Message-Id: <729574587.20050109133610@inbox.lv> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello lartc, Testing some rules I found out that any rules are slowing down large pings! For example: tc qdisc add dev eth0 root handle 1: htb tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbit prio 1 ceil 100Mbit tc class add dev eth0 parent 1:1 classid 1:2 htb rate 100Mbit prio 2 ceil 100Mbit tc filter add dev eth0 parent 1:0 prio 5 u32 \ match ip src 10.10.10.1 \ match ip dst 10.10.10.10 \ flowid 1:2 tc qdisc add dev eth0 parent 1:2 handle 2: sfq perturb 10 Small pings are ok - <10ms, here is output for 65500 byte pings: Pinging test [10.10.10.1] with 65500 bytes of data: Reply from 10.10.10.1: bytese500 time0ms TTLd Reply from 10.10.10.1: bytese500 time0ms TTLd Reply from 10.10.10.1: bytese500 time0ms TTLd Reply from 10.10.10.1: bytese500 time0ms TTLd Ping statistics for 10.10.10.1: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 120ms, Maximum = 120ms, Average = 120ms If I don't use any rules, 65500 byte pings are about ~10ms Any filters are slowing large pings for 10 times!!! What can I do to tune it up? -- Best regards, kasp mailto:waters@inbox.lv _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/