From: Scott Branden Subject: Re: [PATCH v6 0/3] Stingray USB PHY driver support Date: Tue, 19 Mar 2019 11:38:28 -0700 Message-ID: <7490f894-3c0b-c7cd-5ff0-4eea6ea2c199@broadcom.com> References: <1552986944-3398-1-git-send-email-srinath.mannam@broadcom.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1552986944-3398-1-git-send-email-srinath.mannam@broadcom.com> Content-Language: en-US Sender: linux-kernel-owner@vger.kernel.org To: Srinath Mannam , Rob Herring , Mark Rutland , Kishon Vijay Abraham I Cc: Tejun Heo , Jayachandran C , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, bcm-kernel-feedback-list@broadcom.com, linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org Thanks Srinath and Rob - patch series looks good now. patch series, Acked-by: Scott Branden On 2019-03-19 2:15 a.m., Srinath Mannam wrote: > These patches add Stingray USB PHY driver and its corresponding > DT nodes with documentation. > > This patch set is based on Linux-5.0-rc2. > > Changes from v5: > - Removed redundant address and size cells in DT nodes. > > Changes from v4: > - Addressed Rob Herring review comments > - Removed child nodes and added #phy-cells 1 > - Added xlate function to get phy using phandle argument. > > Changes from v3: > - Addressed Rob Herring review comments > - Changed compatible strings. > - updated driver based on new compatible strings. > > Changes from v2: > - Addressed Kishon review comments > - Updated patchset to Linux-5.0-rc2 > > Changes from v1: > - Addressed Kishon review comments > - phy init call return value handle > > Srinath Mannam (3): > dt-bindings: phy: Add Stingray USB PHY binding document > phy: sr-usb: Add Stingray USB PHY driver > arm64: dts: Add USB DT nodes for Stingray SoC > > .../bindings/phy/brcm,stingray-usb-phy.txt | 32 ++ > .../boot/dts/broadcom/stingray/stingray-usb.dtsi | 72 ++++ > .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 + > drivers/phy/broadcom/Kconfig | 11 + > drivers/phy/broadcom/Makefile | 1 + > drivers/phy/broadcom/phy-bcm-sr-usb.c | 393 +++++++++++++++++++++ > 6 files changed, 510 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/brcm,stingray-usb-phy.txt > create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi > create mode 100644 drivers/phy/broadcom/phy-bcm-sr-usb.c >