From: louis@museresearch.com Subject: UAC2 clock selector for AudioBox 1818VSL Date: Thu, 6 Sep 2012 13:20:53 -0700 Message-ID: <76bd1b6473c857ddd3160280e278e4fb.squirrel@master.museresearch.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from master.museresearch.com (master.museresearch.com [69.59.28.231]) by alsa0.perex.cz (Postfix) with ESMTP id 01128261646 for ; Thu, 6 Sep 2012 22:20:58 +0200 (CEST) Received: from localhost ([127.0.0.1]:39994 helo=master.museresearch.com) by master.museresearch.com with esmtpa (Exim 4.77) (envelope-from ) id 1T9iZJ-0005Go-Va for alsa-devel@alsa-project.org; Thu, 06 Sep 2012 13:20:54 -0700 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org Hi! I'm attempting to get the "Clock Selector" mixer control to work with the PreSonus AudioBox 1818VSL (a UAC2 device). The control shows up in amixer as an enumerated value, but I don't seem to be able to set it (I've tried amixer, alsactl, and setting it programmatically). The possible values are correct (listing Internal Clock, S/PDIF Clock, and ADAT Clock as possible options); It just doesn't appear to take my setting, by which I mean amixer doesn't update the settings, I still have the occasional click when the sampling rates match over S/PDIF and I attempt to use external sync. No error is returned. After digging around USB specs and ALSA's usb/mixer.c and being unfamiliar with both the USB audio spec and the inner workings of ALSA, I thought it'd be best to ask the list about this: How would I check to see if ALSA is asking the device to change clock source at all? -Louis