From: Ferruh Yigit Subject: Re: [PATCH v3 3/4] net/bond: dedicated hw queues for LACP control traffic Date: Wed, 5 Jul 2017 12:19:04 +0100 Message-ID: <77a772ef-ac8e-6494-96df-7ff375c8a62b@intel.com> References: <20170629162022.9984-1-tomaszx.kulasek@intel.com> <20170704164627.324-1-declan.doherty@intel.com> <20170704164627.324-4-declan.doherty@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Cc: Tomasz Kulasek To: Declan Doherty , dev@dpdk.org Return-path: Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) by dpdk.org (Postfix) with ESMTP id 27BC12C48 for ; Wed, 5 Jul 2017 13:19:06 +0200 (CEST) In-Reply-To: <20170704164627.324-4-declan.doherty@intel.com> Content-Language: en-US List-Id: DPDK patches and discussions List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dev-bounces@dpdk.org Sender: "dev" On 7/4/2017 5:46 PM, Declan Doherty wrote: > From: Tomasz Kulasek > > Add support for hardware flow classification of LACP control plane > traffic to be redirect to a dedicated receive queue on each slave which > is not visible to application. Also enables a dedicate transmit queue > for LACP traffic which allows complete decoupling of control and data > paths. > > This only applies to bonding devices running in mode 4 > (link-aggegration-802.3ad). > > Introduce two new APIs to support enable/disabled of dedicated > queues. > > - rte_eth_bond_8023ad_dedicated_queues_enable > - rte_eth_bond_8023ad_dedicated_queues_disable > > rte_eth_bond_8023ad_dedicated_queues_enable must be called before > bonding port is configured or started to reserved and configure the > dedicated queuesh. > > When this option is enabled all slaves must support flow filtering > by ethernet type and support one additional tx and rx queue on > each slave. > > Signed-off-by: Tomasz Kulasek > Signed-off-by: Declan Doherty <...> > + > +DPDK_17.08 { > + global: > + > + rte_eth_bond_8023ad_dedicated_queues_enable; > + rte_eth_bond_8023ad_dedicated_queues_disable; > + > + local: *; This line is not required. > +} DPDK_17.05; And this should be DPDK_16.07, otherwise breaking shared build. I will fix above ones while applying. >