From: "Bertrik Sikken" Subject: Re: [REGRESSION BISECTED] backlight control stops workin with 3.14 and later Date: Tue, 19 Aug 2014 11:52:18 +0200 Message-ID: <7955720e6579951f4da64388ab4e1673.squirrel@webmail1.one.com> References: <53CE07D9.3090308@redhat.com> <53CF7651.4080305@redhat.com> <87d2c4qzdf.fsf@intel.com> <53ED11DD.3040104@sikken.nl> <878umpq36f.fsf@intel.com> <53F06B65.4090001@sikken.nl> <87wqa6nt91.fsf@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from webmail1.one.com (squirrelmail.public.one.com [195.47.247.29]) by gabe.freedesktop.org (Postfix) with ESMTP id D69586E312 for ; Tue, 19 Aug 2014 02:52:19 -0700 (PDT) In-Reply-To: <87wqa6nt91.fsf@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: intel-gfx-bounces@lists.freedesktop.org Sender: "Intel-gfx" To: Jani Nikula Cc: "intel-gfx@lists.freedesktop.org" , Bertrik Sikken List-Id: intel-gfx@lists.freedesktop.org > On Sun, 17 Aug 2014, Bertrik Sikken wrote: >> On 15-8-2014 3:43, Jani Nikula wrote: >>> On Thu, 14 Aug 2014, Bertrik Sikken wrote: >> >>>> Attached is dmesg output from booting kernel 3.14-2 (debian unstable) >>>> with drm.debug=0xe and the samsung_laptop module enabled, from my >>>> Samsung N150plus netbook. >>> >>> Have you tried 3.15? >> >> I've built the v3.15 kernel (using the .config file from debian >> unstable and doing make oldconfig). >> >> The backlight is at maximum brightness after boot and I can't control >> it using the backlight buttons, nor by writing to >> /sys/class/backlight/samsung/brightness >> (say half the value or 1/10th of max_brightness) >> >> Backlight does work when writing >> /sys/class/backlight/intel_backlight/brightness > > How about disabling samsung backlight module with 3.15? I'm not sure what you mean by that. As I understand it, there are three ways to control the backlight on this netbook: using intel_backlight, samsung_laptop (using a "sabi" interface) and acpi_video. Backlight control using the samsung_laptop driver no longer seems to work after the change. If I disable it (e.g. by blacklisting it), I expect it to no longer work at all obviously. What do you want me to test exactly? Kind regards, Bertrik