From: Vasu Dev Dasari Date: Wed, 7 Feb 2007 16:05:58 -0800 (PST) Subject: [U-Boot-Users] BMW Platform, PPCBoot version 1.2.0 Message-ID: <797390.49117.qm@web55415.mail.re4.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I am using BMW platform with PPCBoot version 1.2.0. I am seeing a very strange behavior after system powerup. 1. After powering up the target, it goes into auto-boot mode. I configured it to use tftp to download an image file. Unfortunately I entered some wrong parameters in the environment variables. So, I wanted to correct them. 2. When the system is auto-booting, I pressed Ctrl-C system takes me to a prompt. Then I tried to set the variable. After this operation, entire environment variables disappear. 3. I am including my console output here. I am not sure how to come out this either. Plese help me. ------------ PPCBoot 1.2.0 (Oct 22 2003 - 13:42:10) CPU: MPC8245 Revision 16.20 at 198 MHz: 16 kB I-Cache 16 kB D-Cache Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B) Built: Oct 22 2003 at 13:42:01 Local Bus at 100 MHz DRAM: 64 MB FLASH: 1 MB DiskOnChip(TM): 32MB found at address 0xff000000 In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 =>printenv bootdelay=5 baudrate=9600 clocks_in_mhz=1 lan_ifname=bcm0 lan_ifnames= lan_hwnames= lan_hwaddr= wan_ifname=eth0 wan_hwname= timer_interval=3600 ntp_server= log_level=0 time_zone=PST8PDT upnp_enable=0 os_server=http://router:kilroy at 64.162.141.122 stats_server=http://router:kilroy at 64.162.141.122/cgi-bin/stats.pl console_loglevel=7 lan_proto=dhcp lan_ipaddr=192.168.1.1 lan_netmask=255.255.255.0 lan_stp=0 wan_proto=static wan_ipaddr=0.0.0.0 wan_netmask=0.0.0.0 wan_gateway=0.0.0.0 wan_dns= wan_wins= wan_hostname= wan_domain= wan_lease=864000 static_route= filter_ip= filter_tcp= filter_udp= filter_mac= forward_tcp= forward_udp= dmz_ipaddr= dhcp_start=192.168.1.100 dhcp_end=192.168.1.150 http_username=router http_passwd=kilroy http_wanport=8080 http_lanport=80 pppoe_ifname= pppoe_username= pppoe_passwd= pppoe_idletime=60 pppoe_keepalive=0 pppoe_demand=0 pppoe_mru=1500 pppoe_mtu=1500 wl_ssid=Broadcom wl_country=USA wl_closed=0 wl_wep=off wl_auth=0 wl_key=1 wl_key1= wl_key2= wl_key3= wl_key4= wl_mac= wl_macmode=allow d11b_channel=11 d11b_rate=0 d11b_rateset=default d11b_frag=2346 d11b_rts=2347 d11b_dtim=3 d11b_bcn=100 d11b_plcphdr=long d11a_channel=64 d11a_rate=0 d11a_rateset=default d11a_frag=2346 d11a_rts=2347 d11a_dtim=3 d11a_bcn=100 d11g_channel=11 d11g_rate=0 d11g_rateset=default d11g_frag=2346 d11g_rts=2347 d11g_dtim=3 d11g_bcn=100 restore_defaults=0 filesize=3adc0 bootargs=root=/dev/nfs rw os_name=linux os_version=2.4.19-rc3 wan_hwaddr=00:12:23:43:45:67 ethaddr=00:10:18:82:03:79 netmask=255.255.255.0 gateway=192.168.21.1 serverip=192.168.21.91 bootcmd=tftp 100000 bcm/vmlinux.img ipaddr=192.168.21.98 nfsroot=192.168.21.91:/drv1 root=/dev/fl/disc0/disc stdin=serial stdout=serial stderr=serial Environment size: 1718/8172 bytes =>setenv gateway 198.168.27.1 =>printenv =>printenv gateway => ---------------- Thanks, -Vasu ____________________________________________________________________________________ Want to start your own business? Learn how on Yahoo! Small Business. http://smallbusiness.yahoo.com/r-index