From: Hemant Kumar Date: Mon, 20 Apr 2020 22:57:58 +0000 Subject: Re: [bug report] bus: mhi: core: Add support for data transfer Message-Id: <7d1bda90-dec3-3cfe-9bfc-dbcf97f9a72d@codeaurora.org> List-Id: References: <20200407135559.GA109574@mwanda> <20200407143304.GH2442@Mani-XPS-13-9360> <20200417101428.GA10295@Mani-XPS-13-9360> <184d0d8e-1d5f-c317-a40b-1b44e79ad293@codeaurora.org> <19504ACB-4E2A-4883-92E2-7AAC056CE3B4@linaro.org> In-Reply-To: <19504ACB-4E2A-4883-92E2-7AAC056CE3B4@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit To: Manivannan Sadhasivam Cc: Dan Carpenter , linux-arm-msm@vger.kernel.org, kernel-janitors@vger.kernel.org Hi Mani, On 4/18/20 12:19 PM, Manivannan Sadhasivam wrote: > Hi Hemant, > > Please try to use an email client supporting plain text mode like mutt. Your reply looks mangled. > > On 18 April 2020 12:40:10 PM IST, Hemant Kumar wrote: >> Hi Mani, >> >> On 4/17/20 3:14 AM, Manivannan Sadhasivam wrote: >>> Hi Hemant, >>> >>> On Thu, Apr 16, 2020 at 08:37:16PM -0700, Hemant Kumar wrote: >>>> On 4/7/20 7:33 AM, Manivannan Sadhasivam wrote: >>>>> Hi Dan, >>>>> >>>>> On Tue, Apr 07, 2020 at 04:55:59PM +0300, Dan Carpenter wrote: >>>>>> Hello Manivannan Sadhasivam, >>>>>> >>>>>> The patch 189ff97cca53: "bus: mhi: core: Add support for data >>>>>> transfer" from Feb 20, 2020, leads to the following static checker >>>>>> warning: >>>>>> >>>>>> drivers/bus/mhi/core/main.c:1153 mhi_queue_buf() >>>>>> error: double locked 'mhi_chan->lock' (orig line 1110) >>>>>> >>>>>> drivers/bus/mhi/core/main.c >>>>>> 1142 } >>>>>> 1143 >>>>>> 1144 /* Toggle wake to exit out of M2 */ >>>>>> 1145 mhi_cntrl->wake_toggle(mhi_cntrl); >>>>>> 1146 >>>>>> 1147 if (mhi_chan->dir = DMA_TO_DEVICE) >>>>>> 1148 atomic_inc(&mhi_cntrl->pending_pkts); >>>>>> 1149 >>>>>> 1150 if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl))) { >>>>>> 1151 unsigned long flags; >>>>>> 1152 >>>>>> 1153 read_lock_irqsave(&mhi_chan->lock, >> flags); >>>> parse_xfer_event is taking read lock : >> read_lock_bh(&mhi_chan->lock); first >>>> and later >>>> >>>> mhi_queue_buf takes read lock: read_lock_irqsave(&mhi_chan->lock, >> flags); >>>> >>>> Both are read locks which are recursive, is this problematic ? >>>> >>> read_locks are recursive but I wanted to make the static checker >> happy. But >>> looking into it further (and after having a chat with Arnd), we might >> need to >>> refactor the locking here. >>> >>> Since 'chan->lock' only prevents 'mhi_chan->ch_state', how about >> doing something >>> like below? >> >> As comment mentioned for OOB (to enter  DB mode) write lock is acquired >> >> with preemption disabled (irqsave ver). In case of OOB event control >> does not go to mhi_queue_buf >> >> path. > > Again, why do we need irq version of write lock. It should only be used if the data is shared with hardirq handlers which I don't see. Otherwise, write_lock_bh() looks sufficient to me as this itself is an exclusive lock. irq ver disables preemption where as bh ver does not. In case of OOB event, idea is not get preempted and this is for short duration of ringing the channel doorbell. > >> For transfer completion events >read_lock_bh is acquired and >> channel state is checked. >> >> This lock is held for entire handling of the transfer completion so >> that >> in case >> >> __mhi_unprepare_channel() is called from power down context write lock >> is acquired >> >> for channel lock to change channel state, which would wait until >> parse_xfer_event for >> >> data transfer is done (reader is in critical section).  In case if >> __mhi_unprepare_channel() wins then >> >> parse_xfer_event is skipped otherwise parse_xfer_event is done and then >> >> channel state is changed. >> > > So if we get unprepare_channel() after checking the channel state in parse_xfer_event(), what could go wrong? > Also, grabbing the lock for the entire function doesn't look good to me. The purpose of the chan->lock is just to protect 'chan_state'/DB and not the whole function. > main problem unprepare_channel and parse_xfer_event have lot in common due to that we can not let them run in parallel. For example -parse_xfer_event is working on transfer ring (rp and wp updates) -parse_xfer_event calling dma_unmap_single on buffer -__mhi_unprepare_channel() calling mhi_reset_chan() and mhi_deinit_chan_ctxt(). > Thanks, > Mani > >>> >>> diff --git a/drivers/bus/mhi/core/main.c >> b/drivers/bus/mhi/core/main.c >>> index 3e9aa3b2da77..904f9be7a142 100644 >>> --- a/drivers/bus/mhi/core/main.c >>> +++ b/drivers/bus/mhi/core/main.c >>> @@ -474,19 +474,12 @@ static int parse_xfer_event(struct >> mhi_controller *mhi_cntrl, >>> result.transaction_status = (ev_code = MHI_EV_CC_OVERFLOW) >> ? >>> -EOVERFLOW : 0; >>> >>> - /* >>> - * If it's a DB Event then we need to grab the lock >>> - * with preemption disabled and as a write because we >>> - * have to update db register and there are chances that >>> - * another thread could be doing the same. >>> - */ >>> - if (ev_code >= MHI_EV_CC_OOB) >>> - write_lock_irqsave(&mhi_chan->lock, flags); >>> - else >>> - read_lock_bh(&mhi_chan->lock); >>> - >>> - if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED) >>> - goto end_process_tx_event; >>> + read_lock_bh(&mhi_chan->lock); >>> + if (mhi_chan->ch_state != MHI_CH_STATE_ENABLED) { >>> + read_unlock_bh(&mhi_chan->lock); >>> + return 0; >>> + } >>> + read_unlock_bh(&mhi_chan->lock); >>> >>> switch (ev_code) { >>> case MHI_EV_CC_OVERFLOW: >>> @@ -559,10 +552,12 @@ static int parse_xfer_event(struct >> mhi_controller *mhi_cntrl, >>> >>> mhi_chan->db_cfg.db_mode = 1; >>> read_lock_irqsave(&mhi_cntrl->pm_lock, flags); >>> + write_lock_irqsave(&mhi_chan->lock, flags); >>> if (tre_ring->wp != tre_ring->rp && >>> MHI_DB_ACCESS_VALID(mhi_cntrl)) { >>> mhi_ring_chan_db(mhi_cntrl, mhi_chan); >>> } >>> + write_unlock_irqrestore(&mhi_chan->lock, flags); >>> read_unlock_irqrestore(&mhi_cntrl->pm_lock, flags); >>> break; >>> } >>> @@ -572,12 +567,6 @@ static int parse_xfer_event(struct >> mhi_controller *mhi_cntrl, >>> break; >>> } /* switch(MHI_EV_READ_CODE(EV_TRB_CODE,event)) */ >>> >>> -end_process_tx_event: >>> - if (ev_code >= MHI_EV_CC_OOB) >>> - write_unlock_irqrestore(&mhi_chan->lock, flags); >>> - else >>> - read_unlock_bh(&mhi_chan->lock); >>> - >>> return 0; >>> } >>> >>> Moreover, I do have couple of concerns: >>> >>> 1. 'mhi_chan->db_cfg.db_mode = 1' needs to be added to the critical >> section >>> above. >>> >>> 2. Why we have {write/read}_lock_irq variants for chan->lock? I don't >> see where >>> the db or ch_state got shared with hardirq handler. Maybe we should >> only have >>> *_bh (softirq) variants all over the place? >>> >>> Thanks, >>> Mani >>> >>>>>> ^^^^^^^^^^^^^^^ >>>>>> The caller is already holding this lock. >>>>>> >>>>> Hmm. We have one internal user of this function and that's where >> the locking >>>>> has gone wrong. Will fix it. >>>>> >>>>> Thanks for reporting! >>>>> >>>>> Regards, >>>>> Mani >>>>> >>>>>> 1154 mhi_ring_chan_db(mhi_cntrl, mhi_chan); >>>>>> 1155 read_unlock_irqrestore(&mhi_chan->lock, >> flags); >>>>>> 1156 } >>>>>> 1157 >>>>>> 1158 read_unlock_irqrestore(&mhi_cntrl->pm_lock, >> flags); >>>>>> 1159 >>>>>> 1160 return 0; >>>>>> 1161 } >>>>>> 1162 EXPORT_SYMBOL_GPL(mhi_queue_buf); >>>>>> >>>>>> regards, >>>>>> dan carpenter >>>> -- >>>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora >> Forum, >>>> a Linux Foundation Collaborative Project > -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project