From: bugtrack@alsa-project.org Subject: [ALSA - driver 0000763]: I can't make the emulation of /dev/dsp work; the driver "executes" but reports errors; there is no sound output. Date: Fri, 14 Jan 2005 17:25:27 +0100 Message-ID: <7e75967bfbc11662e2b0ff8421a87bd0@bugtrack.alsa-project.org> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit Return-path: Received: from bugtrack.alsa-project.org (gate.perex.cz [82.113.61.162]) by alsa.alsa-project.org (ALSA's E-mail Delivery System) with ESMTP id F2F2D27E for ; Fri, 14 Jan 2005 17:25:27 +0100 (MET) Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org A NOTE has been added to this issue. ====================================================================== ====================================================================== Reported By: lovett Assigned To: ====================================================================== Project: ALSA - driver Issue ID: 763 Category: CORE OSS - pcm Reproducibility: always Severity: major Priority: normal Status: new Distribution: Kernel Version: ====================================================================== Date Submitted: 12-30-2004 22:48 CET Last Modified: 01-14-2005 17:25 CET ====================================================================== Summary: I can't make the emulation of /dev/dsp work; the driver "executes" but reports errors; there is no sound output. Description: I have a "Sound Blaster" card. /proc/asound/cards says: 0 [Live ]: EMU10K1 - Sound Blaster Live! Sound Blaster Live! (rev.8, serial:0x80641102) at 0x8c00, irq 23 ====================================================================== ---------------------------------------------------------------------- lovett - 01-03-05 23:35 ---------------------------------------------------------------------- I think most of the original description of my report was truncated by the boxes I was given. I have attached a file "dspFailure" that describes the configuration of my machine and the experiences with TiMidity, alsamidi, etc. + the syslog entries that complain about "errors". That file ends with a listing of output from "amixer content" that I included to indicate that I thought the mixer levels were non-zero. The listing contains an error that I just rechecked: PCM output voluem = 20,20, not the 0,0 I originally mistyped. ---------------------------------------------------------------------- lovett - 01-14-05 17:25 ---------------------------------------------------------------------- The ALSA installation consisted of going through the ./configure | make | make install sequence with the follow packages: alsa-driver-1.0.8rc1 alsa-lib-1.0.8rc1 alsa-utils-1.0.8rc1 alsa-oss-1.0.8rc1 All compiled and installed without complaint. Booting produced this error message: kernel: Error seeking in /dev/kmem Symbol #snd-page-alloc, value 002c4000 kernel: Error adding kernel module table entry. Loading all the ALSA modules ==> this error message (repeated twice): modprobe: modprobe: Can't locate module snd-seq-client-62 Issue History Date Modified Username Field Change ====================================================================== 12-30-04 22:48 lovett New Issue 01-03-05 12:05 tiwai Note Added: 0003052 01-03-05 18:12 lovett File Added: dspFailure 01-03-05 23:35 lovett Note Added: 0003076 01-14-05 17:25 lovett Note Added: 0003208 ====================================================================== ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt