From: Kevin Hilman Subject: Re: [PATCH 2/2] arm64: dts: Add SEI Robotics SEI510 Board Date: Fri, 15 Feb 2019 15:04:55 -0800 Message-ID: <7hy36girfs.fsf@baylibre.com> References: <20190212140259.9537-1-narmstrong@baylibre.com> <20190212140259.9537-3-narmstrong@baylibre.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <20190212140259.9537-3-narmstrong@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org Cc: Neil Armstrong , linux-amlogic@lists.infradead.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Neil Armstrong writes: > The SEI Robotics SEI510 Board is based on the Amlogic G12A S905X2 > and has the following features : > - Amlogic G12A S905X2 SoC > - 10/100 Ethernet > - USB2 + USB3 ports > - Micro SDCard Port > - Audio + CVBS AV Jack port > - HDMI 2.1 + CEC Port > - ADC Touch Button > - Far-Field Microphone Array + Mono HP > - IR Sensor > - IR Emmiter LED Array > - RGB Led > > Signed-off-by: Neil Armstrong [...] > diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile > index 0821fed4c074..2709f7ede908 100644 > --- a/arch/arm64/boot/dts/amlogic/Makefile > +++ b/arch/arm64/boot/dts/amlogic/Makefile > @@ -1,6 +1,7 @@ > # SPDX-License-Identifier: GPL-2.0 > dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb > dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb > +dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb nit: not sorted alphabetically. I'll move it bofore u200 when applying. Thanks for the new board support! Kevin