From: Matthias Brugger Date: Wed, 13 May 2020 14:11:54 +0200 Subject: [PATCH 1/2] rpi: Kconfig option for initial page reservation In-Reply-To: <20200226213714.37785-2-kevans@FreeBSD.org> References: <20200226213714.37785-1-kevans@FreeBSD.org> <20200226213714.37785-2-kevans@FreeBSD.org> Message-ID: <806b520e-1401-0a13-2bc3-5b5efe78e13c@suse.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On 26/02/2020 22:37, kevans at FreeBSD.org wrote: > From: Kyle Evans > > While the nearly-universal default for the Raspberry Pi family is to use > spin tables and the spin table implementation provided by the Raspberry Pi > Foundation, FreeBSD and others may use a PSCI implementation instead. > > Accommodate these setups by allowing them to configure for more than one > page to be reserved in the initial reservation. The default reservation > remains as one page. > > Signed-off-by: Kyle Evans Queued now for rpi-next. Sorry for the long delay. > --- > arch/arm/mach-bcm283x/Kconfig | 2 ++ > board/raspberrypi/rpi/Kconfig | 10 ++++++++++ > 2 files changed, 12 insertions(+) > create mode 100644 board/raspberrypi/rpi/Kconfig > > diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig > index 00419bf254..e6eb904e7f 100644 > --- a/arch/arm/mach-bcm283x/Kconfig > +++ b/arch/arm/mach-bcm283x/Kconfig > @@ -209,4 +209,6 @@ config SYS_SOC > config SYS_CONFIG_NAME > default "rpi" > > +source "board/raspberrypi/rpi/Kconfig" > + > endmenu > diff --git a/board/raspberrypi/rpi/Kconfig b/board/raspberrypi/rpi/Kconfig > new file mode 100644 > index 0000000000..e40088fde1 > --- /dev/null > +++ b/board/raspberrypi/rpi/Kconfig > @@ -0,0 +1,10 @@ > +if SYS_BOARD = "rpi" > + > +config RPI_EFI_NR_SPIN_PAGES > + int "Spin table page count" > + default 1 > + help > + Number of pages to reserve starting at page 0 for spin tables in the EFI > + memory map > + > +endif >