From: Patrice CHOTARD Date: Tue, 14 Apr 2020 09:32:22 +0000 Subject: [PATCH 07/11] board: stm32mp1: use FDT address provided by TF-A at boot time In-Reply-To: <20200318092245.7.I918c95d6671221dfaa0bd39f24589baf98bcbd09@changeid> References: <20200318082254.7522-1-patrick.delaunay@st.com> <20200318092245.7.I918c95d6671221dfaa0bd39f24589baf98bcbd09@changeid> Message-ID: <823bb10b-8598-e494-e6f3-4774f57ef1a8@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi On 3/18/20 9:22 AM, Patrick Delaunay wrote: > Save and use the FDT address provided by TF-A in r2 at boot time > (it is NT_FW_CONFIG = Non Trusted Firmware configuration file) > > Address is saved in save_boot_params(), called by start.S > and the used DTB is gd->fdt_blob = board_fdt_blob_setup(). > > If dtb is not provided or invalid, U-Boot use as fallback > the builtin DTB. > > Signed-off-by: Patrick Delaunay > --- > > arch/arm/mach-stm32mp/Makefile | 1 + > arch/arm/mach-stm32mp/boot_params.c | 45 +++++++++++++++++++++++++++++ > 2 files changed, 46 insertions(+) > create mode 100644 arch/arm/mach-stm32mp/boot_params.c > > diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile > index eee39c27c3..19ca3b08a5 100644 > --- a/arch/arm/mach-stm32mp/Makefile > +++ b/arch/arm/mach-stm32mp/Makefile > @@ -13,6 +13,7 @@ else > obj-y += bsec.o > obj-$(CONFIG_CMD_STM32KEY) += cmd_stm32key.o > obj-$(CONFIG_ARMV7_PSCI) += psci.o > +obj-$(CONFIG_STM32MP1_TRUSTED) += boot_params.o > endif > > obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o > diff --git a/arch/arm/mach-stm32mp/boot_params.c b/arch/arm/mach-stm32mp/boot_params.c > new file mode 100644 > index 0000000000..e4351de939 > --- /dev/null > +++ b/arch/arm/mach-stm32mp/boot_params.c > @@ -0,0 +1,45 @@ > +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause > +/* > + * Copyright (C) 2019, STMicroelectronics - All Rights Reserved > + */ > + > +#include > +#include > +#include > + > +/* > + * Force data-section, as .bss will not be valid > + * when save_boot_params is invoked. > + */ > +static unsigned long nt_fw_dtb __section(".data"); > + > +/* > + * Save the FDT address provided by TF-A in r2 at boot time > + * This function is called from start.S > + */ > +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, > + unsigned long r3) > +{ > + nt_fw_dtb = r2; > + > + save_boot_params_ret(); > +} > + > +/* > + * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG = > + * Non Trusted Firmware configuration file) when the pointer is valid > + */ > +void *board_fdt_blob_setup(void) > +{ > + debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb); > + > + /* use external device tree only if address is valid */ > + if (nt_fw_dtb >= STM32_DDR_BASE) { > + if (fdt_magic(nt_fw_dtb) == FDT_MAGIC) > + return (void *)nt_fw_dtb; > + debug("%s: DTB not found.\n", __func__); > + } > + debug("%s: fall back to builtin DTB, %p\n", __func__, &_end); > + > + return (void *)&_end; > +} Reviewed-by: Patrice Chotard Patrice