Return-path: Received: from qw-out-2122.google.com ([74.125.92.25]:55669 "EHLO qw-out-2122.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752901AbZKPPwf convert rfc822-to-8bit (ORCPT ); Mon, 16 Nov 2009 10:52:35 -0500 Received: by qw-out-2122.google.com with SMTP id 3so1090395qwe.37 for ; Mon, 16 Nov 2009 07:52:41 -0800 (PST) MIME-Version: 1.0 In-Reply-To: <4B016937.7010906@rug.nl> References: <4B016937.7010906@rug.nl> Date: Mon, 16 Nov 2009 10:52:40 -0500 Message-ID: <829197380911160752lcbfd202gcdbed97b85238bd2@mail.gmail.com> Subject: Re: xawtv and v4lctl with usbvision kernel driver From: Devin Heitmueller To: Sietse Achterop Cc: linux-media@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-media-owner@vger.kernel.org List-ID: On Mon, Nov 16, 2009 at 10:01 AM, Sietse Achterop wrote: >    Dear all, > > Context: >  debian/lenny with usb frame grabber: >     Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM) >  This uses the usbvision driver. > > The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames > in black-and-white. > > I understood that the usbvision driver needs some attention, e.g. a command like > "v4lctl setinput 2" is not working, it will keep using setting 0. > Because I need 2 (S-video) I patched the driver to always use 2 by setting > channel=2 in "usbvision_muxsel" to permanently select that channel. > With that usbvision module loaded I am getting pictures, but in BLACK_AND_WHITE, > as mentioned. > > When starting "xawtv", it works fine! > > With a simple opencv application I do an >        CvCapture* capture = cvCaptureFromCAM( cnum ); >                 ... >        cam = (CvCaptureCAM_V4L*)capture; >                 ... >        ioctl(cam->deviceHandle,VIDIOC_G_FMT,&format)) >                 ... > and find that the format is YV12, but the picture is black-and-white. > But YV12 is a color format. > > The question is, how to get proper color pictures when using v4lctl or other > simple applications with this driver. > >  Thanks in advance, >    Sietse Achterop I don't know about that board in particular, but on some boards the composite and s-video are actually wired together (sharing the luma line), so if you have the device configured in "composite" mode but have the s-video plugged in, then you will get a black/white image (since it expects to see both luma/chroma on the one pin that provides luma). I had this issue on the HVR-950q. Devin -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com