From: miller69@gmx.net Date: Fri, 26 Mar 2004 10:25:38 +0000 Subject: Re: [LARTC] MRTG and IPP2P - Iptables Message-Id: <8473.1080296738@www6.gmx.net> List-Id: References: <000901c41282$eab78280$4505a8c0@leandro> In-Reply-To: <000901c41282$eab78280$4505a8c0@leandro> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org > 09# iptables -t mangle -A POSTROUTING -m mark --mark 1 -j ACCEPT > 10# iptables -t mangle -A POSTROUTING -m mark --mark 2 -j ACCEPT > 11# iptables -t mangle -A POSTROUTING -m mark --mark 3 -j ACCEPT > 12# iptables -t mangle -A POSTROUTING -m mark --mark 4 -j ACCEPT > 13# iptables -t mangle -A POSTROUTING -m mark --mark 5 -j ACCEPT > I have only added the --soul and --bit networks, with mark 6 and 7.......= =20 > And the command iptables -t mangle -L -n -v -x is working fine.... SHowing So you need MRTG working on the packet/bytecounters of POSTROUTING? I'm not familiar with MTRG but a simple shell script should at least be able to extract the numbers. I'd be glad to see any solution to this! > 0.0.0.0/0 ipp2p v0.5c --soul MARK set 0x6 Well, one hint: IPP2P will mark some soulseek packets but the downloads won't get marked. You can use IPP2P to drop soulseek packets thus making so= ulseek stop working but marking (and shaping) will not work properly. Regards, --=20 +++ NEU bei GMX und erstmalig in Deutschland: T=DCV-gepr=FCfter Virenschutz= +++ 100% Virenerkennung nach Wildlist. Infos: http://www.gmx.net/virenschutz _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/