From: Daniel Schwierzeck Date: Sun, 7 Apr 2019 20:09:27 +0200 Subject: [U-Boot] [PATCH v4 0/4] Add network support for Jaguar2 SoCs In-Reply-To: <1554314088-6594-1-git-send-email-horatiu.vultur@microchip.com> References: <1554314088-6594-1-git-send-email-horatiu.vultur@microchip.com> Message-ID: <85d87a29-45bb-0688-9781-cccb4eb6477c@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 03.04.19 um 19:54 schrieb Horatiu Vultur: > v4-changes: > - address Daniel comments. > > v3-changes: > - move serdes setup in network driver and read serdes > configuration from DT. > > v2-changes: > - create serdes6g_setup and serdes1g_setup functions to be > easier to extand for future boards. > > Horatiu Vultur (4): > net: Add MSCC Jaguar2 network driver. > board: mscc: jr2: Update MSCC Jaguar2 boards > net: mscc: jaguar2: Add ethenet nodes for Jaguar2. > configs: mscc_jr2: Add network support > > arch/mips/dts/jr2_pcb110.dts | 76 +++ > arch/mips/dts/jr2_pcb111.dts | 400 ++++++++++++ > arch/mips/dts/mscc,jr2.dtsi | 116 ++++ > arch/mips/dts/serval2_pcb112.dts | 44 ++ > board/mscc/jr2/jr2.c | 23 + > configs/mscc_jr2_defconfig | 6 +- > drivers/net/mscc_eswitch/Kconfig | 7 + > drivers/net/mscc_eswitch/Makefile | 1 + > drivers/net/mscc_eswitch/jr2_switch.c | 1075 +++++++++++++++++++++++++++++++++ > include/configs/vcoreiii.h | 2 +- > include/dt-bindings/mscc/jr2_data.h | 19 + > 11 files changed, 1767 insertions(+), 2 deletions(-) > create mode 100644 drivers/net/mscc_eswitch/jr2_switch.c > create mode 100644 include/dt-bindings/mscc/jr2_data.h > series applied to u-boot-mips/next, thanks. -- - Daniel