From: Sebastian Krause Subject: Re: no sound with hda-intel, conexant venice chip on hp 2836 Date: Thu, 16 Aug 2007 22:15:42 +0200 Message-ID: <874pizkzgx.fsf@news.realpath.org> References: <20070815173601.GA3227@bentham.lan> <1187227351.5512.280.camel@razman.gruemaster.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-=-=" Return-path: Received: from ciao.gmane.org (main.gmane.org [80.91.229.2]) by alsa0.perex.cz (Postfix) with ESMTP id 6A7481038DB for ; Thu, 16 Aug 2007 22:25:05 +0200 (CEST) Received: from root by ciao.gmane.org with local (Exim 4.43) id 1ILltu-00012c-IC for alsa-devel@alsa-project.org; Thu, 16 Aug 2007 22:25:02 +0200 Received: from mue-88-130-70-250.dsl.tropolys.de ([88.130.70.250]) by main.gmane.org with esmtp (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 16 Aug 2007 22:25:02 +0200 Received: from sebastian by mue-88-130-70-250.dsl.tropolys.de with local (Gmexim 0.1 (Debian)) id 1AlnuQ-0007hv-00 for ; Thu, 16 Aug 2007 22:25:02 +0200 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@alsa-project.org Errors-To: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org List-Id: alsa-devel@alsa-project.org --=-=-= Tobin Davis wrote: > For some reason, your system is defaulting the output pin connections to > the mixer as opposed to the pcm (Node 0x10 & 0x11 should connect to > 0x19). > > Are you dual booting to Windows? I've had issues getting this driver > debugged, and this is usually one of the causes. I'll try to revisit it > again soon. I have a very similar problem as Pieter-Augustijn, at least regarding the symptoms: Everything seems to be quite fine, I don't get any error messages and neither see weird things in dmesg. But using Linux my laptop has never produced any sound until now (trying different distributions). Neither after a cold start. I'm using an Acer Aspire 5710Z and also I'm dual-booting with Windows XP. Since I couldn't find any clues about my problem yet I didn't know where to start tuning my settings (currently they're just still Ubuntu default). I've attached the audio output of "lspci -vv" and the alsa-info.sh script. Thanks, Sebastian --=-=-= Content-Disposition: inline; filename=lspci.txt 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Unknown device 012e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR-